Ariston Technologies AW129NA 16 Lbs Front Load Washer Logo
Anonymous Posted on Jan 03, 2009

Soon as i set cycle and swich on door light flashes open

This machine is a whirlpool awm 6145/3 when i set programme and press start within a minute the machine light flashes door open stopping the cycle going any further please can any one help.

  • Anonymous Jan 03, 2009

    the programme stops after a couple of seconds as soon as the door open light starts flashing

×

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

  • Master 679 Answers
  • Posted on Jan 03, 2009
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

Joined: Jan 03, 2009
Answers
679
Questions
0
Helped
348632
Points
1860

Hi,
The cycle doesn't advance
When the cycle doesn't advance, it's probably the timer or a cold-water supply problem:

It's the timer, if your washing machine fills with water and begins agitating, but the timer never advances--or if the washer is in a spin cycle and the timer won't advance. Then you need to replace the timer. 


It may be a cold-water supply problem, if the washing machine fills with water, agitates, drains, and spins, but then doesn't fill with rinse water. See There's no cold water.

Thanks for your question.

  • Anonymous Jan 03, 2009

    yes sure its because of TIMER.


  • Anonymous Jan 20, 2009

    please let me know if problem solved.
    Thanks for using FixYa.



×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

I have a wtw5600xw0 Whirlpool washer. When I press the start button the sensing light and lid lock lights turn on. Then after a few seconds the lid lock light goes off and the sensing light stays...

Swich off the machine, try some WD40 on the door mechanism (on machine lock, not on the door) and open & shut for a minute or two. Then try the machine, spin only just to try.

Rate pl, if solved, or dont!

Source

1helpful
2answers

Whirlpool AWM 6100/s Front load washer

Sounds like the front door switch has come out of place, or the actuator is out of place. If you can take the front cover off to get to this switch, you should be able to get it back into place pretty easily. Hope this helps, chad
0helpful
2answers
0helpful
1answer

I have a whirlpool sixth sense washing machine. the door open light constantly flashing although the door is well shut. No programmes work

We had the same issue: the cycle would start then stop, with the door open light coming on. It turned out to be a faulty contact in the door. Took a technician 15 minutes to fix.
0helpful
1answer

Whirlpool awm 6145/3 washing machine. Door shuts cycle starts but within about 5 seconds it stops and door open light comes on.

your door safety switch may be to blame,, if its faulty the machine gets a notice that something is wrong and stops,, to check that try this link http://www.partselect.com/Virtual-Repairman.htm
3helpful
1answer

Whirlpool AWM 8143 - Starts a cycle and then starts flashing open door light and won't go further. Door is shut properly. Tried turning it off at the power and back on to no avail.

This is either a problem with the door lock itself or most probably a motor failiure as the door open light also indicates some kind of motor problem. If your appliance is 4/5 years and above then you will most likely need to change the set of carbon brushes on the motor and this will solve your problem
0helpful
1answer

Program will not start, door light flashing

Has anyone had any joy with this? I have exactly the same problem.

Thanks
0helpful
1answer

Front loader AWM 6100 - door open light flashes and won't wash

I think it may have try and get your local engineer out to have a quick look tell your thinking of buying new and what price can he supply 4. and you like a free estimate .
0helpful
1answer

Whirlpool Duet Washer GHW9150PW1

Swich off the machine, try some WD40 on the door mechanism (on machine lock, not on the door) and open & shut for a minute or two. Then try the machine, spin only just to try.

Rate pl, if solved, or dont!
Not finding what you are looking for?

597 views

Ask a Question

Usually answered in minutes!

Top Ariston Technologies Washing Machines Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

vince

Level 3 Expert

2530 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66931 Answers

Are you an Ariston Technologies Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...