No power to canon ip 2770 even turn on

SOURCE: How to reset printer canon

visit this link:

http://pcmediks.blogspot.com/2010/10/how-to-reset-canon-pixma-ip2770.html

castletech

• 372 Answers
• Posted on Jul 13, 2010

SOURCE: looking for driver printer canon pixma iP 2770

Try Canon website

SOURCE: Reset Printer Canon Ip 2770

try here [url]http://pcmediks.blogspot.com/2010/10/how-to-reset-canon-pixma-ip2770.html[/url]

SOURCE: service error 5100 on Canon

Hello thanks for using FixYa

Error 5100 means that the cartridge can not be detected by the printer. Actually the printer is not actually loading the cartridge and showing you the error 5100.
To solve these follow the following steps. I hope it works

• Turn off printer
• Remove both the cartridges from the printer
• Use a clothe moistened with alcohol to clean the surface contact on the cartridges where the terminals inside the printers touches
• Return the cartridges
• Turn on the printer.

SOURCE: i have a canon printer

Here's How to Reset Canon IP2770 Error 5200:
1. The printer is turned off and plugged the power cord.
2. Press Resume button 2 seconds
then press the POWER button until the green light on (when pressing the POWER button, Resume button ... jgn released first)
3. Then release the RESUME button, but do not release the POWER button.
4. While the POWER button is still depressed, press the Resume button 5 times. Led will light turns green orange with the last glow orange. (do not be mistaken 4x because the printer will die completely, but it is temporary too) Then ...
5. Release both buttons simultaneously.
6. Led will blink briefly and then will glow GREEN.
7. And the computer will detect new hardware, just ignore ...
8. Press the POWER button, then the printer will die.
9. Press the POWER button again then the printer will flash and ... IP2770 Printer is ready to use