HP 5610 officejet all in one: how do i check my ink levels?

If printer is in warranty, demand for replacement.

1. Check ink levels in printer..if levels are showing, take out all ink cartridges refill them.
If levels are zero, go for new cartridges.
2. If ink level are showing in printer & physically cartridges having ink, then problem with print head, try to clean the clogged nozzles.

ideally diagnostics should return the info about ink levels.
but in case they dont you can try below
1. Hp Solution Center > Settings > print settings > printer toolbox > Estimated Ink level

2. go to control panel->printers->go to priinter properties it should show ink levels

Checking ink levels

1. open HP solution center on the computer desktop screen
2. click on settings on the bottom
3. click printer toolbox
4. click the estimated ink levels tab

or

1. on the printer control panel,push the wrench button
2. press the right arrow to go to print report
3. push OK
4. select self test
5. push OK

It will print a page with color bars signifying correct ink levels.If a color bar is blank it means it's empty or depleted and needs to be replaced

If your Printer software is installed on your computer only then you can see Ink levels.
Open HP solution center (Start - All Programs - HP) Goto Maintainence and check Ink levels

You need the HP Toolbox software: Follow these steps to check the ink levels in the Toolbox . The Toolbox is part of the standard printer software. Depending on the version of Toolbox on your computer, the appearance of the Toolbox features might vary. NOTE: Ink level warnings and indicators provide estimates for planning purposes only. When an indicator shows low ink levels, consider having a replacement cartridge available to avoid possible printing delays. Print quality deteriorates as cartridges run out of ink.

1. Click Start .
2. Click Printers and Faxes .
3. Right-click the icon for your printer and then click Printing Preferences .
4. Click the Features tab.
5. Click the Printer Services button. The Toolbox window opens.
6. Click the Estimated Ink Levels tab. A window opens that indicates the estimated ink level of each cartridge.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response

Thanks, Joe

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

fallow the steps to get inklevels in every time of printing,

hai reader this option is not from windows Operating System its a printer manafacturer utility fallow the steps to activate it

Start - Printers & Fax (If not available in the list go for control panel and find the printer & fax option) - select the printer proprities - select printing preferences button - their search the option and put tick to activate the show ink levels on the time of printing.

but the softwares displayes displays the ink levels of the cartridge is approximate that is not a true.

Checking ink levelsUse one of the following methods to check the ink levels. Method one: Check the ink levels from the HP All-in-One The ink level is displayed on the main screen of the control panel display. Locate the two icons that represent the print cartridges. The icon on the left is for the color cartridge and the icon on the right is for the black cartridge.

• The exclamation mark (! ) symbol indicates a low ink level.
• The question mark (? ) symbol indicates the product cannot determine the status of the print cartridge. This might be because the cartridge is refilled.

Figure 1: Ink levels on the control panel display 1 - Exclamation mark indicates low ink in the color cartridge 2 - Ink level in the black cartridge is OK Method two: Check the ink levels from the computer using the HP ToolboxFollow these steps to check the estimated ink levels using HP Toolbox.

1. Make sure the product is on and connected to the computer.
2. Open HP Solution Center .
• Windows XP: On the Windows taskbar, click Start , click All Programs , point to HP , and then click HP Solution Center .
• Windows Vista: On the Windows taskbar, click the Windows icon ( ), click All Programs , click HP , and then click HP Solution Center .
• Windows 2000: On the Windows taskbar, click Start , click Programs , point to HP , and then click HP Solution Center .
3. Click Settings .
4. Point to Print Settings , and then click Printer Toolbox . Printer Toolbox opens.
5. Check the ink levels displayed on the Estimated Ink Levels tab.

Figure 2: Estimated ink levels

Try this

For Windows users: In the HP Solution Center, click Settings, point to Print
Settings, and then click Printer Toolbox. Click the Estimated Ink Levels tab,
and then click Print Cartridge Ordering Information.

manual is here

http://h10032.www1.hp.com/ctg/Manual/c00461378.pdf

only wy to check levels is to install the software that is part of the printer it will give you ink levels as they go down

for colored is only 3ml and the black is 8ml