Kitchenaid electric range yker1201 with f2e0 error

Question edited for clarity. Please always include Maker and (what it is)'.

Mainboard control Issue. It can sometimes be fixed with a Power Reset.

F2 E5 - Electric Range - Product Help

KitchenAid https://producthelp.kitchenaid.com > ... > Starts with F2
Dec 14, 2019 - Power unit up by turning on the circuit breaker(s). Monitor the oven for one (1) minute to ensure the error code does not display again. Verify ...

Missing: KGRT607HW4 ‎' Show results with: KGRT607HW4

F2 E5 - Wall Oven - Product Help

KitchenAid https://producthelp.kitchenaid.com > ... > Starts with F2
Dec 14, 2019 - Power unit up by turning on the circuit breaker(s). Monitor the oven for one (1) minute to ensure the error code does not display again. Verify ...

Missing: KGRT607HW4 ‎' Show results with: KGRT607HW4

I have a Kitchen Aid oven that is giving me an E5 and F2 and

JustAnswer https://www.justanswer.com > Appliance Repair
Aug 16, 2020 - Select the 'cancel' function and wait 60 seconds. If error code reappears then replace the touch pad, or touch pad and control board (clock) if ...

1 answer · Top answer: Manufactured August 2006. Your friend was correct. Only 14 years old
Missing: KGRT607HW4 ‎' Show results with: KGRT607HW4

What are error codes E5. F2 - Q&A

Best Buy https://www.bestbuy.com > site > questions > question
Jan 17, 2019 - F2-E5 - Cancel Key Line Open - Check the connection between the touch pad (keypad) and control board (clock) to make sure it is secure.

Hi


Thanks for using FixYa. Error F2-E0 in your Kitchen Aid range indicates shorted keypad. To resolve this issue you’ll have to replace the electronic range control (ERC). Please do rate the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Hi


Thanks for using FixYa. Error F2-E0 on your kitchen aid means that the keypad is shorted and to resolve this issue you’ll have to replace the electronic range control/clock (ERC). Please do rate the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Your electronic range control clock has gone out on this unit. You can contact us at accurate-appliance-service.com for all your parts. We can get the correct part out to you right away.

We hope this answers your question and the best of luck to you.

You will probably have to replace the electronic range control.

Turn off the breaker and wait for 5 minutes. the follow this 3 steps:
--> After turn the breaker back on, go to the range and press "OFF", "OFF", "START", then click on the "clock set", there is a message on the display saying that do you want to delete the error, at this time press on the "START" again. And wait for a while until the everything on the screen disappear except the clock time. Hope this will fix yours. It fixed mine.

"cycle the circuit breakers" is to turn the switch for the stove at the electric switch box at the main feed of the house electric panel. This is equivalent to unplugging the stove and plugging it back in.

In the old days, a circuit breaker was a "fuse" in the "fuse box"...

sonds like a bad hightemo thermostat, loacted on the back wall behind the rear panel, common issie for ovens ,espessially after going through a self-cleaning,part number 9759242, part is about $50 turn off power before attempting to change, LIVE WIRES!!!!

I have the same problem...stuck key err F2E0
Can any one please tell me where is the sensor? I mean which part of the oven have sensor, is it inside or under the button control panel?