Thanks, Not Brett, battery on D 330 showed 66% and would turn off when taking a measurement. Changed battery like you suggested and everything works fine.Thanks, Not Brett, battery on D 330 showed 66% and would turn off when taking a measurement. Changed battery like you suggested and everything works fine.
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
first off it is not a computer at all why post this thing to computers?
let it sit for 24hours,batteries removed.l .
use fresh Type AA 1.5 V. batteries and see it work
never not try new batteries on any battery device that acts oddly.
you paid $600 for this thing , OMG too much.
worth $100 + $500 name Leica
Leica L
Leica Disto D510 (E7500i) 650ft/200m Laser Distance Measurer w/ Bluetooth and Disto Sketch App for iPhone/iPad - Red/Black
There is no error code 270 listed for a Leica Digital DISTO D3a 100M Laser Distance Meter.
Are you sure that's the code?
Or do you have a different make or model of laser distance meter?
Press and hold the circle button down, after a few seconds it will flash 'beep on/off', dont stop holding it down, it will then cycle to 'units', press +/- to change between metric and imperial, then press the = button to store. If you keep holding it down you can set the reference pont (where the measurement is taken from, the back, middle or front edge of the machine) add an offset (add take away from the displayed dimension), and you can also reset the machine.
but simply, to get the distance to appear, turn on the unit with the large red ON/DIST button, aim the red laser dot at your desired target, and press the ON/DIST button again. The distance will appear on the display screen.
Greg DeTray, www.distagage.com
Mike,
Leica does not sell replacement keypads, if the unit is less than 2 years old they will cover it under warranty. Contact the dealer you bought it from and they can handle the warranty exchange. If it is over two years old, it is out of warranty, but they offer a "repair" option, which will replace your damaged A3 with a new D3 for about $215. If you bought it from a reputable dealer, you shouldn't have any problem.
Hope this helps,
Greg DeTray www.distagage.com
×