My Samsung SIR-S300W direct TV receiver is plugged in the power light indicates its on, but i get no picture on my tv, it worked fine a month ago. the remote wont turn off the receiver and pressing the power button on the receiver will not work either.
Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.
Amazon com Charm sonic Wireless CSR4 0 Portable Bluetooth Receiver...
Call direct tv and ask for a reset. When you do not use your receiver leave it on and connecetd or it will not receive updates and will forget what it once knew. Actually I think you can use the automated system and use (I think...not sure) code 712 to reset all your receivers with out waiting for help.
496 views
Usually answered in minutes!
×