Question about Konica Minolta bizhub C250 All-In-One Laser Printer
Can u pls advice how to fix this problem
thanx
An expert who has achieved level 2 by getting 100 points
Here’s your GEEK-steer …
This thread appears to cover the solution to your problem related to error "C5102: Main Motor’s failure to turn":
http://www.copytechnet.com/forums/konica-minolta/15515-c252-m1-operation-test.html
In addition, here’s the link to “Bizhub C250P” related support downloads:
http://kmbs.konicaminolta.us/content/support/supporthome.html
Hope this helps, and please post back with a status report and/or any further assistance you might need.
"Today's the best day of my life...and NOW you're part of it!"
Posted on Dec 16, 2008
well, this was helpful to know that I needed to wait on the copier repair tech to come and fix the problem. But what was the biggest help and blessing was your signature tag....Today's the best day of my life...and NOW you're part of it! WOW! In the midst of an extremely stressful week, what a blessing to have that be a reminder to me to push back and see that I should be looking at each and every day in this manner. THANK YOU SO MUCH for your encouraging words. May God bless you!
Today's the best day of my life...and NOW you're part of it!.....what a reminder to me in the midst of an extremely stressful week that I need to push back and look at each and every day in this manner. What a blessing! Thank you so much for this encouragement. May God bless you!
×
C5102: Main Motor’s failure to turn
Relevant Electrical Parts
Main Motor (M1) Mechanical Control Board (PWB-M)
DC Power Supply (PU1)
Step Action
WIRING DIAGRAM
Control Signal
Location (Electrical
Component)
1
Check the M1 connector for proper connection
and correct as necessary.
— —
2
Check M1 for proper drive coupling and
correct as necessary.
— —
3
Check the PWB-M connector for proper
connection and correct as necessary.
4
M1 operation check PWB-M CNDM1-5 (REM)
PWB-M CNDM1-8 (LOCK)
L-2
5 Change PWB-M — —
6 Change PU1 — —
Posted on Dec 26, 2008
Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Good luck!
Posted on Jan 02, 2017
Jan 23, 2017 | Konica Minolta Minolta Bizhub C353 Copier
Dec 14, 2015 | Konica Minolta BizHub C252
Jul 11, 2015 | Konica Minolta BizHub C252
Dec 11, 2014 | Konica Minolta bizhub Office Equipment &...
Apr 01, 2014 | Konica Minolta bizhub C250 All-In-One...
Jan 20, 2014 | Konica Minolta bizhub C250 All-In-One...
Nov 11, 2013 | Konica Minolta Bizhub C353 Copier
Feb 26, 2013 | Konica Minolta bizhub Office Equipment &...
Apr 17, 2012 | Konica Minolta Office Equipment & Supplies
Jan 30, 2012 | Konica Minolta bizhub 250 All-In-One Laser...
26,277 people viewed this question
Usually answered in minutes!
While printing, received this code message, and of course - its saturday. How can I fix this?
×