I have a Bosch Sensixx B25L - TDS2511GB Iron. When iron has heated up steam comes out from the side of the iron instead of the holes on the iron plate and this burns your hands when you press the steam button. Iron handle is too hot to hold, I have cleaned sole plate, added white vinegar to water filter incase clogged but problems still happen. This is the 2nd replacement i have had from Bosch as the first time it happened the iron would not heat up after time. Please advise is you know of any faults or remedies to stop the iron from burning me or can this be fixed.
See the instruction from your manual:
Check the owner's manual for your iron to learn the manufacturer's
suggestions for cleaning, what water to use, and storage tips.
Soft-water systems add minerals that can harm an electric steam iron and
your clothes so don't fill the iron with softened water. Instead, use
filtered or distilled water.
2) if the iron does not heat a( test the power cord for open or defective b) and thermostat for adjust c) test the thermal fuse d) test the heating element for open.
God bless you
SOURCE: I have a Bosch Steam
Your steam generator my have mineral deposits that are clogging the steam openings. One of the easiest things to do is to pour out the water and add white vinegar. Let the vinegar sit for about 2 hours. Then turn on the iron and press the steam button until the deposits are loosened and flushed by the heat and steaming vinegar. Do this on a towel or other absorbent fabric so you don't stain your ironing board. You may need to unplug the iron, let it cool and then gently **** the steam vents with a wooden skewer or toothpick.
I hope this helps you. If it does, please rate my suggestion!
SOURCE: bosh sensixx B25L iron spraying brown water
I have a bosch sensixx b25l and it has started spraying brown water all over the clothes how do I descale it please
3,713 views
Usually answered in minutes!
my bosch tda 8337 iron has come loose from the iron plate
×