My son received the game yesterday. When we try to enter coordinates for Player 1's ships, it repeatedly says "incorrect coordinates." We are entering the letter, then the number, then enter.

Instructions explain Com tower card.

The Com Tower card if drawn is to be positioned face up and another card is drawn. If you or your opponent collects all 4 Com Tower cards before the other, a special power is earned; all hits are instant sinks for the rest of the game! This means if you hit a ship the player must call our all remaining coordinates of that ship and the ship is sunk instantly.

https://kiddiescornerdeals.com/2012/04/battleship-movie-edition-game

If you mean, can you enter latitude and longitude coordinates on your GO 750 LIVE GPS device .... yes.

First you'll want to set your unit to accept coordinates. From the main menu, tap Change Preference, then select "Set Units" and select a Latitude and Longitude format in the "Coordinate display" screen, and then tap Done.

To navigate to a location using latitude and longitude coordinates, follow the steps below:

1. From the Main menu, tap Navigate to...
   
2. Tap Latitude Longitude.
3. Enter the coordinates and tap OK.

Hello,

Coordinates can be entered by marking the waypoint and editing it.
From the map screen, press the joystick down for 2 seconds to mark the waypoint. Toggle up to the coordinates and press the joystick to enter the edit mode. Make the changes to the coordinates to the new coordinates and toggle to OK, press the joystick to enter the coordinates.

To reset your pass code, repeat this procedure at any time.
Reset a Forgotten Pass Code
To reset your pass code after you've forgotten it:

1. Go to My Xbox and open System Settings.
2. Select Family Settings, Console Controls.
3. Enter an incorrect pass code.
4. You'll be told that your pass code is incorrect. SelectReset pass code.
5. You'll then be shown your pass code question and asked to answer it

When you press on your Where to? graphic a menu will come up that will give you a number of choices including
Address, Go Home, Points Of Interest, and 3 others. There should be an arrow point down in the lower right corner of the screen. When you press that the screen will scroll down a page and you should then see the Coordinates Globe. Press this and the screen should change to the Enter Coordinates screen. This will allow you to enter two sets of coordinates for your destination.

I am glad to hear the issue is solved.

Thanks!

There are two ways you can load a way point.

1. Hit mark on your GPS. Push up on your rocker until the coordinates are highlighted. Once they are hit enter. From here you can change the coordinates to what ever you want.

2. If you have the software (Mapsource Trip & Waypoint Manager) you can enter the waypoint by going to "Edit" then "New Waypoint" or hit Ctrl + W as a shortcut. Once you create all the points you need, plug in your GPS and turn it on, then click "Send to Device"

Make sure that your mapsource and GPS are both setup on the same datum and lat/lon style corrdinates as well or it could throw it off.

Thats the same problem i have Tell me if you ever find the solution i need it fasstt

Mark a waypoint, then edit the waypoint, entering the new co-ordinates.

SELECT THE SECURITY DIGITS TO ENTER PRESS THE FM OR AM BUTTONS PRESS THE [[ ]] ARROW SEARCH BUTTONS TO MOVE ALONG AS YOU ENTER YOUR CODE WHEN CODE IS ENTERED PRESS AND HOLD ]] FORWARD SEARCH BUTTON FOR 3 SECONDS RE-ENTER MAY APPEAR REPEAT THE SAME AS ABOVE TO COMFIRM CODE IF NESSARY HOPE THIS HELPS YOU JAKE YOU CAN DOWN LOAD A MANUAL FREE I HAVE ENCLOSED MY MOBILE NO 07936635539