Whenever I turn on my player, the words "MAGNAVOX" appears, like always, but that's all it does, and then turns off. It does this no matter what I do, and turns off after several minutes or seconds.
I tried battery replacing, but it doesnt work.
It is not even recognized by my computer, and I've tried firmware and holding it for 10-15 seconds with the back button and +volume.
Nothing works still.
So is there any way to fix this?
Or am I screwed...
I thought I'd try leaving it alone for a few days, but I dobut that'll do anything...
HI FRIENDS THIS IS KIRAN
TO SOLVE THE ABOVE ISSUE
* REMOVE BATTERY
*PLACE THE LOCK BUTTON IN UNLOCK POSITION
*INSTALL MAGNAVOX SOFTWARE IN THE PC
*CONNECT TO THE INTERNET
*CONNECT THE DEVICE TO PC HOLDING THE SYNC BUTTON ON THE DEVICE
THEN YOU WILL SEE AN MSG STATING "DO YOU WANT TO REPAIR THE DEVICE"
CLICK YES
Go to this link and Downlod the firmware from here. When I ran the firmware download , it repaired the Mangnavox device manager. I uninstalled the mass storage usb device driver from my PC first in device manager. Then the instructions from chandramukhi worked! I thought it was weird to keep the battery out but it worked.http://www.m4c.magnavox.com/cgi-bin/dcbi...
×
Just to clarify for those of you who are confused easily like me:
When you connect the mp3 player into your USB port, you need to hold the button down AS you are plugging it in, not after it is in the port. THen the device manager will recognize it. ^_^
1,179 views
Usually answered in minutes!
I turn on my mpc MSA2025/37 playerr, the word MAGNAVOX comes on, and then after about 10 seconds it turns itself back off.
Thank you so much!!!
It fixed it!!!
×