I need to know if the mixer is 1 or 3 phase.Look at the plug---does it have 3 or 4 prongs?
Make sure the green (ground) wire goes to the ground on the plug,it should be marked green.Then hook up the other 3 wires in any order---turn the mixer on,the beater should move clockwise--if not change any 2 wires and it will run the right way.Let me know.
Does the plug have 3 or 4 prongs?
Is there any way you could post some pics?
×
154 views
Usually answered in minutes!
3 phase
not sure where the ground is there are no wires attached right now so i dont have anything to go by.
3 i think but theres no plug. there never was one when i got i
What im looking at is inside the mixer stand at the back. There are 5 to 6 screws where the wires attach. 2 of them are connected to something inside the mixer. Each of those wires seemed to be connected to one of the other screws. and then theres one on its own that i figure is the ground.
I tried attaching wires and pluging it in. I heard a small humm but it didnt turn on. Its been in a shed for the past few months so it was really cold when i tried. Not sure if that would make a difference.
And thanks for your wime and assistants it is greatly appreciated.
i tried hooking up a cord. It made a humming sound but no action. It may be to cold out. since its in the a shed
×