I have a convergance problem (red and blue are both offset). I tried going into the convergance menu, but the crosshairs won't move. Am I doing something wrong or do is the problem minor or severe?
Probably need to replace the convergence ICs inside the TV. The Ic is about 2" x 3" and mounted on large aluminum heatsink. Usually 2 or 3 (depends on model)
I had someone look at my tv that fixes them and what i had to do was replace the chips that were in their for about $120 for everything labor and all. because if the perfect focus wont work like mine then its probably the chips.
If your convergence setting will not adjust the picture you need to replace the Convergence amps. A repair shop will do this for $200-$300 depending on your area.
This is a link to a guide on concergance http://www.cinemasource.com/articles/calib_video_proj.pdf
I found out why the crosshairs won't move. The replacement Sanyo convergence IC's was bad STK392-150. I had another spare generic STK392-150, and it worked for half of the beams. Awaiting another STK392-150 to arrive.
Reccomend using a tech but try looking around for the best price.
Change your convergence cartridges and check your resistor specially the fusible ones and all low values.. a small change in value can prevent any automatic convergence circuits from operating Robertinmiami
SOURCE: Tried convergance, but would work
This are the links to guide you with step by step directions and diagrams
http://www.repairfaq.org/sam/tvfaq.htm#tvtvrep
or
http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm
or
www.tv.manualsonline.com
38,040 views
Usually answered in minutes!
Also replaced STK392 150's and the digital convergence won't move according to remote control. When I press the directional keys on the remote the screen just flashes instead of moving the color lines.
the colors wouldn't align on the screen and even doing the perfect focus it didn't help so i had the chips replaced in it for 120$ at my house and now the tv works just fine. which is great for me because somebody just gave it to me because they couldn't figure out what was wrong with it, so i got the tv for about 120$.
I have a yellow stripe at the top going across the tv and the a bright blue stripe under it. The words on the tv also have a double image and use these blue and yellow colors. the stripes are not solid stripes, but curves and also miss small sections from being a complete stripe. Please help me figure out how to fix this, my warranty just ran out, of course. Thanks
After the magic focus button is reset, the number 4 shows up. The colors on the tv are a blue stripe across the top followed by a yellow stripe, lettering is out of focus showing double images, lots of blue and yellow smeared it appears. Please help get my tv realigned.This is a Hitcahi 53 inch projection tv.
how yo get into the service mod to do the convergence alignment? thanks
I have 55pp9401 with red ghost next to subject and then green ghost to the right of the red ones like the whole thing is not lined up properly. The set was not moved or tampered with, just happened while I was cruising chanels
Blue and red outline everything on screen.
GREEN AND PINK IMAGES OR HALOS ON SCREEN DOUBLE PRINTING ON TV 55" PHILLIPS
yes , I have the same problem with my Hitachi HD convergance problem ..just wandering how do i fix it....
The colors on both sides of screen showed up with line of 2 colors and picture had some colors on images now all I have is colors jumping all over my screen,no picture
the colors are mess up and it looks like 3-d need some help please to fix it
×