Belt is 5/8"x 50"
SOURCE: drive belt and a manual for 8 hp tomahawk chipper
did you find a manual? mine is 8hp Super Tomahawk, model 47258. I have manual, but not parts diagram. I need parts, flails and tamper. Got any leads? twinblade88 at hotmail dot com
SOURCE: Is there some way to
Like a car engine, there should be a tensioner pully. If not, each pulley should have a bolt that hold it in. To remove the belt, unbolt one pulley, (whichever is easiest to get to, or more feasible to remove) - When installing the new belt, put the pulley on first, and if need be, use a screw driver to "pry" the belt over the pulley into place. This will not hurt the belt.
There should be however a tensioner pulley, or one of the pull belt pulleys should have a slider bracket. Make sure first if this is true.
Please let me know if you need further assistance.
carsandcomps,
Guru, Premium Expert, Phone Support, Live Chat @ Fixya.com
422 views
Usually answered in minutes!
×