Parts for Mcculloch MC 1275 steam cleaner

see attached link
http://index.about.com/index?am=broad&q=wagner+steamer+parts&an=msn_s&askid=2d930698-7f72-4fa0-81dd-13ced89fc4b6-0-ab_msb&dqi=wagner%2B905%2Bpower%2Bsteamer%2Bcleaner%2Bparts&qsrc=999&ad=semD&o=22874&l=sem

Hi winnons2...

The only thing I could find on McCulloch is a phone number.
I am sure once you reach this number they would be able to help you farther.
To receive a user manual or parts.
You need to call 1-800-521-8559, ask for guidance to help with obtaining a USER manual and it will tell you where the parts go and what their name is and what you will use is for.
Ask for a PDF Manual, you will need the model number of the Steam Vacuum
They will email it to you for free
Please take time to rate me

You can get the manual on link below. Scroll down to Product Details than click on the product manual.

http://www.amazon.com/McCulloch-MC-1275-Heavy-Duty-Steam-Cleaner/dp/B0000DF0RB

Good luck

You can get the manual on link below. scrool down to Product Details than click on the product manual.

http://www.amazon.com/McCulloch-MC-1275-Heavy-Duty-Steam-Cleaner/dp/B0000DF0RB

Good luck and please rate

Were you able to find one of these? I need one also. thanks

Hello,

Here's a link to the instruction manual for the McCulloch MC1275 steam cleaner. If this helped you, please be so kind to leave feedback for me, or rate the repair. This is greatly appreciated, and is what keeps repair professionals answering free questions here on Fixya.

Thanks so much,

McCulloch MC1275 Steam Vacuum Owners Manual:

Here's a link to a site. Just downloaded one FREE

Did you get the manual you needed? If not, e-mail me and I'll scan mine and e-mail it back to you.

I had the same problem today. It turns out part of the steam hose was kinked. If you feel along the black tubing - this covers the actual steam hose, you may feel a hard spot where the inner hose may have kinked. Mine was near the end so I cut into it, cut out the kinked part, and reattached the hose to the endpiece - where it screws onto the body. If you do have a kink you will at least have to cut through the black tubing - careful not to cut the inner hose; you will see the nylon wrapped hose inside and can try to fix it. I was unable to unkink it without cutting it, you may have better luck, or you can do what I did. If you decide to, once you take apart the endpiece you'll see how it all goes together, pretty easy to figure out. Alternatively you might be able to buy a new hose through http://www.topinnovations.com

Hope this solves your problem, if you haven't already. Good luck.

does your motor run if not there is a service switch to the motor inside the unit that has to be adjusted