Hi! I have a Samsung HT-TZ315R home theater system and I am trying to connect the two surround speakers with the main unit using the Samsung SWA-4000 WIRELESS TRANSMITτER MODULE but it doesn't work. I followed the manual step by step pressing the buttons "0", "1", "3", "5" on the remote control and kept pressing the "SET ID" button for 5 seconds on the wireless module so that the main unit and the wireless module can sync but it doesn't work. Can you please help me out?
I have had the same problem with the wireless unit and thought the same, it didn't work. The way to fix this is simple. You need to do the 0, 1, 3, 5 on the remote and turn on the home theatre system on the main switch on the front panel (as I was doing this on the remote, and it was failing). The blue light should then stay illuminated. If not just switch the main on/off button again, and it shoud work.
You have to plug the 2 spair speaker cables into the 2 rear speaker ports on the reciever. The wirless speaker setup should work than... I had the same problem until I plugged them in.
Mine was doing the same thing. My simple solution was to turn the wireless card over. It fits in my samsung both ways and I had it upside down...duh. turned it right side up and everything checked perfectly. :)
Does the swa-4000 come with the tx card?
Make sure you have the wires hooked up to the 2 back speakers and then stick the wireless moduel near the 2 speakers in the back. The blue light on the moduel should stay a steady blue.
Hi guys, I have soved my problem with the SWA-4000. Well, at the first time, after I have performed some tests with my Home (HT-X715) and the SWA-4000, I took them to the store where I have bought them. So they give me another one (both systems were with problem!!!!!). I should help you!
22,561 views
Usually answered in minutes!
I have a HT-TWZ412T. My SWA-4000 connects with the main unit, but still does not deliver sound to the speakers. I have changes swapped speakers, but still no sound. Can anyone help?
I have the Samsung swa 4000 as wel, My Link light is a ateady blue, but I still get no sound from rear speakers. We tries the 0,1,3,5 and the ID Rest, with no luck. Any other helpful hints?
I do not understand why my wireless module will not connect to the main receiver unit. I have tried pressing 0135 on the remote while the power is turned off the main unit while the wireless module is on standby. after entering 0135, I immediately hold down the id set button for 5 seconds and release. Immediately after the 5 seconds passes, I turned the power on the main unit, and it does not connect, it only blinks blue until it eventually goes to standby again. please help as this can be very frustrating after spending lots of money on this system
I have the same problem. I just bought a SAMSUNG HT-X715 and a SWA-4000 but the wireless connection does not work. The blue link fails all the time. I have made as indicated by the user manual but nothing ;-( thanks for the helps ;-)
Hi, I have a Samsung HT-TZ515 and I can't program my SWA-4000 to my system. I follow the steps by pressing 0,1,3,5, on the remote and by pressing the SET ID button on the module for 5 seconds and I can't get it to work.Can anyone help? Thanks.
i have problem with tx card is cased
×