Toro riding lawnmower lot of slack in steering wheel

If you are having trouble getting both front and back wheels of your Toro 360 Quad Steer to line up straight, there are a few things you can try:

1. Check tire pressure: Uneven tire pressure can cause your wheels to misalign. Make sure the tire pressure is the same on all four wheels.
2. Check alignment bolts: The Toro 360 Quad Steer has alignment bolts that allow you to adjust the alignment of the wheels. Check to make sure the bolts are not loose and adjust them if necessary.
3. Check steering linkage: The steering linkage may be worn or damaged, causing the wheels to misalign. Inspect the steering linkage for any signs of wear or damage, and replace any worn or damaged parts.
4. Check for bent parts: The wheels may be misaligned due to bent parts, such as the tie rods or axle. Inspect these parts for any signs of bending or damage, and replace them if necessary.
5. Seek professional help: If you are unable to adjust the alignment yourself, it may be best to seek the help of a professional mechanic or service technician who has experience working with Toro 360 Quad Steer equipment.

try putting power steering fluid in

Download the owners manual

Toro

check your spindles and steering levers

you will have to pull the front wheel steering spindells if they dont have grease fittings and grease them

Worst case, you have a damaged wheel motor :(
Your machine is still under warranty? Speak with an authorided dealer ASAP as continuing to run it can cause a lot more damage within the wheel motor / pump system.

..... could be an issue with the L wheel motor or pump. Get it checked ASAP as continuing to use it can cause a lot of damage if it is the pump or wheel motor!

I have a riding toro lawn mower that cut off on me and wouldn.t start back, what could be my problem? The crak wheel trys to turn but it won,t turn over

the spider gears are in on the wrong side more less like you put the rear end in backwards

need the ser number of the unit. the pulley don't split its one part, i need the ser number . this is no easy job. good luck