Littlern, Im thnking the 61 was your ambient temp on the refer side. The codes show up differnt than that. This is a very complicated machine. Sounds like a temp sensor has gone bad, the main board or the compressor overload itself. You can put it into a self diag mode by pressing power freeze and power cool together for 8 seconds. This is going to test all the sensors, fans, defrost cycles. The error that comes up will show as a - or | running clockwise on a digital 8 figure and then has to be decoded on a chart. For exampe: If the - is present on the bottom side of the 8 in the display, this means a a number 4 error which means a rerigerator fan error. It's gets pretty confusing, it's good you called the service tech. Make sure to get an extended warranty on this model..Catriver..post back.
864 views
Usually answered in minutes!
My problem is opposite. The fresh food side works fine but the freezer side started blinking. I tried unplugging and re-plugging to reset. Now the freezer side temp has gone to 61. The fan works when I push the light switch in.
×