Top loading Admiral Model # LNC6766A00 washer will fill properly and once the machine starts to agitate it makes a loud noise, washer will spin out and everything works, just the loud noise and grinding it makes, What should I try first?
If you begin dissassembly from the tub down, you wil come to the transmission with the spindle sticking out of it. If you undo the bendable tabs all around the transmission it comes apart in two halves. Careful, its full of oil. The spindle has a plastic gear bolted to the bottom of it. It meshes with other gears in the tranny. It has sheered teath and is making the noise.
I have the same problem, loud plastic squeak/grind when agitating only. I'd like to fix it, but have never taken apart a washing machine.
The advice below sounds good but where do you start with "begin dissassembly from the tub down"....etc. Anyone have a good internet resource with images for disassembling this machine?
Thanks.
Hi everyone im expirancing the same problems. washer works good, just when in spin cycle it seems as if the barrel becomes so uneven that it knocks around. i have tried less clothes, making sure they are even and everything, still continues. the noise has gotten so bad that it sounds like a earthquake and that the washer will tip over from so much banging. i have never taken apart a washer either but am capable with a few instructions
4,557 views
Usually answered in minutes!
Loud grinding sound when agitation starts
So loud you can not watch tv in the other end of the house
my son (14) put his clothes in the washer after i used it and overloaded it. he put to much in it. now it waon't agitate. i can grab the center peice and hold it. if i let it go it moves slightly. this is the only probelm i see. checked bottom for a broke belt. belts fine, it spins on spin cycle. i have the admiral aav7000aww. 2 yrs old
i have the same problem,i have "some"mechanical know how,is this a diy fix?
I have the same problem with a 13 month old AAV7000AWW model. Thanks for the answer. Will try to see if the gears are destroyed. I probably did overload it at some point.
Once the wash starts, theres a loud banging noise and the machine moves, what can i do to stop it from banging around.
loud grinding noise while agitating.
Inglis...very loud grinding noise during the wash cycle.
Sometimes OK after resetting it several times!
looked at the belt etc seems ok!
same ... a banging, almost squeaking during the wash cycle
agitator spin slowly and grinds how do i fix the problem
We have a loud roaring once the agitator begins to move - LOUD!!. Where do I find a manual to dissassemble the machine? It's 3 yrs old - out of warranty and now this!! We can't find any info in the manual on troubleshooting this - any suggestions for a web link for this washer problem?
Carl & Paula
doesn't agitate or spin
Machine making loud noise while running thru cycle
The top part of the agitator on my Admiral Ultima will not stay in place
2100 series washer top load
×