As the title says. Cleaned drain when 1st stopped spinning and it worked for 2 days. Then stopped spinning again. Checked drain and it's clean. When put in "spin" mode, the drain pump comes on and "drains"..then stops. Spin doesn't spin and we let it sit for a bit and then it beeps as if it's "completed". I don't mind buying a motor, but if it's not the motor, then what?
I had the same problem a year ago. nothing seemed to work. we even got a new washer, same problem. we ended up putting the washer on its own circuit. works fine now.
Note your brand and model. Check on YouTube for change of motor brushes. Then disconnect your motor and check your brushes; follow noting how you dis-assemble so you can re-assemble easier. If your brushes are less than half an inch long get new brushes (thru this very site Fixya) and refit; actually this is quite easy. The spin has a lot to do with worn motor brushes. Manufactures want you to dump machines and buy; it helps them all. Not you - you shell out bucks
Click is helped pl, at my solution.
368 views
Usually answered in minutes!
what make , what model .
Bosch Nexxt 100 Series WFMC1001UC
Thinking more on this. If the drain area and the filter is clear, is there any other portion of the drain that will keep it from spinning? Wondering if putting a hose through the drain line to flush it would help any.
We already have a dedicated circuit for our washer. Thanks for the info though.
still looking for solitions
No experts out there with any advice on what to look for next?
×