My pandigital keep makeing me forceclose evrythingand i cant do nothing

http://androidforums.com/threads/how-to-solve-error-unfortunately-the-process-android-process-acore-has-stopped.854534/

Look at the green box at the bottom first and try that.

The factory data wipe/reset on the top should only be tried of all else fails.

Try holding down the power and volume up buttons down for several seconds to try and soft reset your device. Power down and restart it. You don't state your model of Pandigital-that makes it hard to determine exact reset procedure. Also look for a small hole on the back or sides of the device, into which you can push a toothpick or paper clip to push a reset button (check your manual for location and reset procedure for your device). You can also try powering down, then press the volume down button and while holding that down, press the power button to turn the device back on. The error indicates a major problem with the base android software - did you recently upgrade software or install some new app? If it was a new app, try uninstalling it and see if the problem goes away.

I would recommend following the steps in the below link. It has detail information on how to fix this issue. Mine was same as you and it fixed. Though I lost a few apps and contacts. But did have a back up in my SD card and re installed them. Watch out and test your phone when installing the apps one by one and you could narrow down the culprit.

Force close error or process stops unexpectedly Android

Good luck and Merry Christmas.

You can try deleting your Gmail account and then reinstalling it.
good luck

Have you tried a factory reset? Its in Settings - Privacy - Factory Reset

seems like the firmware is crashed. have u tried backing up and doing a soft reset ?

That only happen when android is rooted the way to fix that is to get gapp updates

I also had this problem. What I did was hooked my pandigital up to my computer and put videos on there that would take up alot of room. After I unplugged it I got a message saying that my memory was low. I clicked on the message and it showed me all the default applications instead of the applications I download. I clicked on my browser and pressed force stop and clear cache and it had worked fine. If you dont feel like doing all that work I suggest you download another browser such as Opera Mini or Dolphin Browser mini.

You can restore your epad to factory settings by going to the settings menu > privacy > Factory data reset. and then your epad should be running normally again.