Kenmore 24032\24036 Top Load Washer Logo
Posted on Oct 18, 2008

Whirlpool Model LSV6234AWO

Washer starts okay filling with water, runs though wash cycle okay, drains and rinses. Refills for the rinse cycle and never empties or runs the spin cycle. Runs on rinse until dial turns (by itself) to off, leaving tub full of water. I turn the dial to spin and it starts right up and spins water out. During this spin cycle no water is sprayed into the spinning machine.

  • 4 more comments 
  • Anonymous Mar 16, 2014

    my whirlpool dishwasher fills with water but does not go into wash cycle

  • Anonymous Mar 16, 2014

    washing machine doesn't spin enough water out. sometimes it makes a loud clunking sound and doesn't drain the water out at all so I have to set it for another rinse and spin cycle.

  • Anonymous Mar 17, 2014

    Water will not run in during rinse cycle unless in push knob in then pull it back out

  • Anonymous Mar 28, 2014

    washed fine. during rinse cycle, water just runs out. doesn't fill up

  • Anonymous Mar 28, 2014

    washing machine will not gain speed in spin cycle to spin water out.

  • Anonymous Mar 30, 2014

    will not wash, will not start any cycle even when dial manually turned

×

1 Answer

A

Anonymous

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Cold water won't stop before rinse cycle

if it fails to stop running only at the rinse part of the cycle it is probably in the timer as the solenoid valve has to cut the water off when the washer fills for the wash cycle too. fills for wash cycle and cuts off water, washes and drains, refills for rinse cycle and water just keeps running? does this every time you run it? that's in the timer. bad solenoid (water inlet valve) would keep running even on wash fill up. hope this helps.
0helpful
1answer

Whirlpool washer model lsr8233eqo

So when the cycle first starts, it will fill and agitate and spin. But then on the rinse cycle it stops?
0helpful
1answer

My Whirlpool Duet ht Washer starts washing fine, it drains then it starts flashing FH and wont take in water for the rinse cycle. It does this for every cycle, it will wash fine but after it drains and is...

The first thing I would check is shut off the cold water valve at the wall and remove the hose at the washer.carefully pry out the little screen in the inlet and clean well,reconnect hose and turn water back on FH is a water inlet issue I am hoping that what is happening is that when the washer starts its wash cycle it is probably filling with warm (hot) and cold water at the same time even though it might be mostly hot,but when it comes time to rinse (cold water ) there is not enough to make the computer happy and you get your FH error.. Hope this Helps,,If not your probley looking at a new fill valve assy
0helpful
1answer

WHirlpool Waser model LSR8133HQ0 - tries to fill for rinse cycle

hellow my name is joyce and It sounds like you have a issue with your cut off valve that controls the water flow to your machine in between cycles, this is controled by your timer switch you may want to call technichian to repair. sounds like the only problem you have with the timer is on the rinse cycle not the wash cycle, but it defently needs to be fixed. if I can help you find a repair person please let me know.

thanks you and let me know if I can further assist you.
joyce
4helpful
1answer

Whirlpool Washer - Imperial Series Quiet Wash 2

your washers drain hose is too far down the drain pipe which is causing a siphoning action pull the washers drain hose out pipe some you should be able to hear water dropping into the pipe the reason it only happens in the rinse cycle is because the water from wash is being drained and before the water vacuum is broken the rinse water comes in causing it to keep draining
0helpful
1answer

Washing machine refills after spin cycle

Can you hear the pump running if not the machine may be syphoning out, if the outlet is into the down pipe too far this can cause it to syphon. The outlet should only be into it by about 6". The machine will fill with more water on the rince than the wash cycle that will cause the problem. If you can hear the pump running the machine mite be over filling there may a blockage in the presure system if you take the lid off (making sure the powers turned off) you will find a round switch with a thin hose comming off it tace the hose and you should find a small bottle this may be blocked. Hope this helps you.
0helpful
1answer

Basin will not fill with water during rinse cycle but will agitate and spin.

most new washers have cold water only rinse and spray rinse ck cold water coming into machine during wash if no cold comes in suspect cold side of fill vale not opening ..could be wiring issue or a bad valve
0helpful
2answers

Whirlpool filling and washing, not draining, rinsing or spinning

Check out your outlet filter, probable it is clogged. Clean this out and refit. Most cases when the drain or spin does not work, it is the filter. This is a suggestion.
Not finding what you are looking for?

982 views

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Alexander

Level 2 Expert

171 Answers

Cindy Wells

Level 3 Expert

6688 Answers

vince

Level 3 Expert

2530 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...