Office Equipment & Supplies Logo

Related Topics:

A
Anonymous Posted on Jan 15, 2012

Samsung SCX-3200 FUSER UNIT FAILURE #U1-2113

NEW PRINTER

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 1 Answer
  • Posted on Sep 10, 2012
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Sep 10, 2012
Answers
1
Questions
1
Helped
3357
Points
8

Fuser unit failure #u1-2113, how to solve this problem?

5 Related Answers

Anonymous

  • 5 Answers
  • Posted on Feb 11, 2011

SOURCE: Need Samsung SCX-3200 chip reset

http://mkmservice.ucoz.ru/load firmware chip reset SCX 3200

Ad

Anonymous

  • 1 Answer
  • Posted on Jan 24, 2009

SOURCE: requiring scanner software for samsung SCX-4216F printer

Dear Sir,

I have Samsung SCX-4216 printer. Printing, Xerox & Fax working is OK, but scan facility is not working because i missed the original software. please give me  a solution for get the original software or scan drivers.

With Regards
Mohan

Anonymous

  • 837 Answers
  • Posted on Jan 18, 2009

SOURCE: the driver of Samsung Scx-4Z16F printer

Here it is

Anonymous

  • 1 Answer
  • Posted on May 29, 2010

SOURCE: Printer Samsung sCX-4521f CRU Fuse Error

Printer Samsung sCX-4521f CRU Fuse Error

Anonymous

  • 241 Answers
  • Posted on May 02, 2011

SOURCE: how reset samsung scx 3200

here u got solution

www.nakshatraworld.com

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2helpful
1answer

Samsung scx 3201 printer. I print the page but when I rub it, the print is gone!

this is caused by a failure of the fuser unit.
The fuser usually heats the paper to fuse the toner to the paper.
0helpful
1answer

Samsung printers

This error is a fuser malfunction. You will need to replace the fuser unit in order to get this running again. A fuser unit will run about $90 for a refurbished unit. You should check the manual for more error codes: Samsung SCX 5635FN Manual
0helpful
2answers

Samsung scx 3200 prints dark but xerox copies are so light that they cant be read

HI PLEASE CLEAN THE CCDUNIT .YOUR PRINTER CCD UNIT IS VERY LOTS OF DEST.AFTER CLEANING CCD THEY PRINT SAMSE SO REPLACE CCD UNIT WITH CABLE
0helpful
1answer

I'm using Samsung SCX-4521F printer. but after printing all words are erased from paper. what should I do to fix this problem?

Verify the fuser unit.The image dont fixing on paper.Is fusing unit problem.Verify the fuser heater lamp continuity,the thermistors and the spring at lower pressure roller.
2helpful
1answer

My machine Samsung SCX - 4521F showed the message fuser low heat error. What should I do My e-mail address is [email protected]

there is problem with your fuser unit thermistor.. you will need some tech know how to remove the fuser unit and clean the thermistor.
0helpful
1answer

SCX-4300 Monochrome Laser Multifunction Printer: I unplugged the power cord, that didn't help. I bo...

If you turn on the printer in the correct voltage, you can call the Samsung and ask to warranty. Now if the printer is off warranty period, test the fuser lamp in the same voltage of the printer.
Take off the fuser, disassemble then take off the lamp and connect two wires in each terminal of the lamp (Fuser lamp works on the same voltage as the printer and is "AC").
Plug the two wires in the power energy. If the lamp is ON, OK!! If not new fuser is necessary.
0helpful
2answers

Samsung clx-2160

Hi I asked about the CLX-2160 NOT the SCX-4100  I have had no replies yet
Regards
Anthony Showman
1helpful
2answers

Failure to print

Hy i had the same error message the error comes from the fuser unit , the halogen lamp is not heating , on the top of the fuser unit is a Thermostat in series with the halogen lamp wich u have to replace. Its not that easy if you dont have experince but it will solve the heat error. I hope this helped
1helpful
1answer

Fuser unit

You state an SCX-4720F, but the picture refers to an SCX-4200. Parts are only avalable through local service center. Go to www.samsung.com and follow the "Support" link to find the one nearest you.
Not finding what you are looking for?

3,367 views

Ask a Question

Usually answered in minutes!

Top Samsung Office Equipment & Supplies Experts

Cindy Wells

Level 3 Expert

6688 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Norman Weimar
Norman Weimar

Level 3 Expert

7035 Answers

Are you a Samsung Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...