How do yo attach the pedastal for a whirpool duet washing machine.
You will want to lay the duet unit on its back. remove the legs. put the base up to the bottom of the duet. you can use the legs as bolts and pass them thru the top of the base back into the bottom of the duet appliance, using them as bolts. I have had some people just get new bolts. this should fix you up. please rate this if it was any help.
Thanks,
David
You must first remove the drawer by lifting 2 small black plastic clips located on front left and right side on the slides.After removing the drawer there should be 4 hole on each corner of pedistal you will need screws that would fit. normally it comes with the pedistals.Then insert screws not all the way just enough to slide the holes on the pedistalon to the body of washer.Then tighten .Good luck
662 views
Usually answered in minutes!
×