Sometimes the weather brings us surprises. For example, it is sunny in the morning bet when you leave your office, it is snowing outside. So, it can spoil our evening. In such cases, snow day finder is necessary because it can warn you about future weather changes.
SOURCE: national geographic Weather analyzer software help
be shure that you have fresh AA battries in both the reciver and the probe.. also first power up the reciver befor you install the software.
SOURCE: Omnitech Wireless Weather Station model
Push and hold down the channel button, wait for beep, then on the sensor, push and hold the tx button, wait for beep.
SOURCE: I have a 00594 weather
hi.
I assume that you have used some fresh batteries,it is recommended to replace both indoor and outdoor unit to get a best result....after replacement you need to reset it..
I do not know if you have the instruction manual for your unit however just in case I hereby included a URL link for you to download it..
THIS LINK LINK WILL GIVE YOU THE USER MANUAL. ITS IN PDF FORMAT THIS WILL SURELY HELP YOU TO SET UP .
Take care and please Remember to rate/vote and give
me 4 Thumbs Up for me to continue for Helping out the Community :)
Thanks
http://theguidedb.com/search/the-acurite-weather-stations-00594--wa-guide.html
SOURCE: Sharp Weather Station Model SPC344 The outside
After inserting the batteries, DO NOT set the time until the OUTSIDE temperature registers. That's the trick.
There is a battery in both the transmitter and receiver. If either one of them is weak then it won't sync. I would try replacing the transmitter battery first.
2,365 views
Usually answered in minutes!
×