Question about Bosch Nexxt 100 Series WFMC1001UC Front Load Washer
Just going on these symptoms, you may need a new control/timer.
Inside the control /timer are electrical contacts, and when your machine gets to that part of the cycle, the contacts are not closing to allow the cycle to complete.
If you have circuit board, you will perhaps need a new one of those.
If you do not, probably a control/timer assembly.
If you type "SeasPartsDIrect" into you computer's search engine, and then type your complete model number into the blank when you are asked for it, you may look at the schematic and see whether you have a control / timer or a circuit board.
God bless your efforts.
Posted on Oct 08, 2017
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Bosch Nexxt 100 Series washer
Bosch Nexxt series 100 place clothes in machine start add detergent as always machine begins to add water for about 30 seconds then stops , sometimes stops and sounds like it is trying to drain sometimes just stops and won't unlock door even if you turn machine off. Sometimes if you switch from hot to cold washer will work just fine for a couple of days then back to just stopping.
Posted on Sep 23, 2008
possibly the motor brushes.
take back panel off. disconnect motor. remove bolts holding motor in and take out motor. check condition of brushes
Posted on Oct 18, 2008
You first of all need to check the pump filter.
This should be located at the botom front right of washer.
Look for a drop down flap or cover, once located, unscrew filter anti-clockwise to remove and clean.
The pump itself is directly behind the filter housing, check there is nothing stuck in the housing.
This should solve the prob.
Please leave feedback for my solution.
Posted on Jan 11, 2010
Testimonial: "I submitted a question and got a very quick response. The response was useful and enabled me to make the repair myself. Thank-you!"
SOURCE: bosch 100 series will not drain
You need to check and clean the pump filter if you have not already done so.
This is located at the bottom front right of washer.
Unscrew anti-clockwise to remove and clean.
Posted on Mar 15, 2010
Tips for a great answer:
Feb 07, 2015 | Bosch Nexxt 100 Series WFMC1001UC Front...
Apr 24, 2014 | Bosch Nexxt 700 Series WFMC6401UC Front...
Mar 26, 2013 | Bosch Nexxt 100 Series WFMC1001UC Front...
Mar 18, 2013 | Bosch Nexxt 100 Series WFMC1001UC Front...
Dec 21, 2011 | Bosch Nexxt 100 Series WFMC1001UC Front...
Jan 22, 2011 | Bosch Nexxt 100 Series WFMC1001UC Front...
Jun 28, 2010 | Bosch Nexxt 100 Series WFMC1001UC Front...
Jan 11, 2010 | Bosch Nexxt 100 Series WFMC1001UC Front...
Mar 09, 2008 | Bosch Nexxt 100 Series WFMC1001UC Front...
Oct 21, 2015 | Bosch Nexxt 100 Series WFMC1001UC Front...
985 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: