First you have to find the error code. Wake the machine by pressing any button Wait 5 seconds Ail LEDs will go blank and after a few
seconds the control will signal the stored code using audible beeps and blinking
LEDs. The control will repeatedly signal the code, as long as the Start and Pause Cancel buttons are pressed. As long as the buttons are held, the failure code will
appear in the display as an E followed by two
numbers, a number and a letter or two letters, please post back with the error
code for further assistance.
So! To recall an error code,
Press and hold the Start and Pause Cancel buttons simultaneously
A two-second pause between
repeats affords you the ability to make accurate counts to identify the correct error codes.
231 views
Usually answered in minutes!
×