Meade_Telescope_Parts counterweight shaft meade 4504

https://www.meade.com/downloads/manuals/reflectors-114-manuals/4504.pdf

Yes you can just make sure that the power cord has the CORRECT pin polarity- you can order the 12 volt cigarette lighter style cord from Meade.
http://www.meade.com/support/index.html

Only Meade would have the repair parts. Sorry. You will need to either use it as is, or purchase another telescope.

The telescope TUBE could be re-mounted on a photo tripod and used manually if you want to do this.

Very doubtful you will find this part. Meade does not support this telescope anymore. It may be possible to find a used one on Astromart.com by placing a WANT AD-- it will cost you $12 to register and place the ad.

Meade can repair these - call their customer service department here:
http://www.meade.com/support/index.html

Some repair parts can be purchased from Meade but not very many. Meade usually wants you to send in the telescope for most repairs.

Call them at the phone number listed on the above web site.

http://www.meade.com/manuals/TelescopeManuals/Reflectors/4504.pdf
try that website. brings up an instruction manual via pdf file.

Bring the broken parts to a local proffessional machine shop. It will no doubt cost a bit, but they should be able to do it. No, epoxy won't work.

114EQ-DH4 same as 4504. Manual on Meade website

Here is the manual off the Meade web site--
http://www.meade.com/manuals/TelescopeManuals/Reflectors/4504.pdf

Any Meade dealer can get you a hand controller for the scope--

Try these two--
http://www.optcorp.com/

http://www.bigbangastro.com/

Call them up ---

I believe the 114eq-dh is equivalent to the model 4504, and there is a very helpful egroup dedicated to those scopes: http://groups.yahoo.com/group/Meade4504Telescopes/ You can download the manual from the link below: http://www.meade.com/manuals/m4500/index.html Please update the question & let us know if the information given was useful to you - Good Luck!