Washing Machines Logo

Related Topics:

Posted on Sep 23, 2008

Bosch WFL2450 Washing Machine wont spin cycle

Had this machine about 5 years and no problems.

Stopped in mid cycle, machine fills but does not rotate drum. Checked drain and there was small coin in catchment, which was removed and no other obstructions. Impeller rotates and checked that the machine is draining ok. Run just on a spin cycle and programme completes without the drum rotating at all although you can here noise from the machine

Any ideas what to check next?

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Sep 24, 2008
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Sep 24, 2008
Answers
1
Questions
0
Helped
680
Points
2

Hi there, this problem sounds as though the carbon brushes are needing replaced or infact just needing to be cleaned of dust or dirt. Its very common for the brushes to be covered in dust and fibres. Im not sure where the brushes will be on this model but I hope this helps you in someway.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

tip

How to fix Bosch Classixx 6 washing machine pump fault

My Bosch Classixx 6 Express 1200 washing machine suddenly developed three faults at the same time, with no fault codes. The water pump, fill and spin cycles all stopped at the same time. I found that the one of the pump wires had come loose from the connector plug. This will not only stop the drum from emptying but will prevent the machine from filling and also stops the spin cycle. These are all interconnected and controlled by the water pump, which has to be working and connected. Hope this helps. My 11 year old machine is now working perfectly. ,
on Feb 23, 2019 • Washing Machines
0helpful
1answer

Doesn't work. Why does it stop mid-cycle?

washing machine stopped mid cycle, won't drain : DIY - Reddit

https://www.reddit.com/.../washing_machine_stopped_mid_cycle_...

RedditSep 3, 2014 - helpwashing machine stopped mid cycle, won't drain (self.DIY). submitted 1 ... I get home. Any ideas on how I can just drain the water out of it?

Troubleshoot - washer stops mid cycle, won't drain or spin ...

? 1:58
https://www.youtube.com/watch?v=6Gc0ZgLD6a4
Jun 20, 2012 - Uploaded by searspartsdirect
Troubleshoot - washer stops mid cycle, won't drain or spin .... I agree, this was not helpful, and did not address the no spin issue. like thanks. ... how to fix a Kenmore / whirlpool washing machine that wont drain agitate or spin ...

Washing machine stops mid cycle - White Goods Help

www.whitegoodshelp.co.uk > ... > DIY Washing Machine Repair Help
Sep 9, 2013 - Possible causes when washing machine stops mid cycle by a ... If thewashing machine can't drain the water out then it will stick on the rinses, ...

Why does my washer stop half way through cycle - Ken



0helpful
1answer

Eratic, sometimes door lock doesnt activate, when it does wahser starts but stop mid cycle and wont continue. Replaced door switch and pump

Repair needed on Maytag Neptune washer - Home Improvement ...

www.dslreports.com > ... > Home Improvement

DSLReports
Aug 5, 2007 - 19 posts - ‎8 authors
Forum discussion: We have a Maytag Neptune front-loader washing machine that ...the drain/spin cycle after a wash even though the timer continues to ... related circuit board failure" their Neptune washer will lock the door, turn on the ... then will either not start tumbling or will stop operation mid-spin cycle.

How To Fix A Washing Machine That Is Not Spinning or ...

removeandreplace.com/.../washing-machine-or-washer-dryer-is-not-spin...
May 13, 2013 - The absolute first thing to do to your washing machine that will notspin or drain (whether it. ... I was so fed up with the machine sometimes refusing to spin or drain the .... I just did a load and it stopped midcycle with e and f error codes.... I tried different cycles but all that happens is the door lock engages ...

Maytag Washer Troubleshooting - YouTube



0helpful
1answer

My Bosch washing machine won't turn the bowl

Hi Justene,
i Think its control circuit has a problem.
or the fuse for motor drive circuit is damaged.

please check with electrician.
regards.
nuwan
0helpful
1answer

Hotpoint wma22 fills with water but won't wash or spin

Suspect motor brushes need replacing.
Simple task accessed by removing the top of the washer and releasing the clips holding the brushes into the motor - clip on back of brush - to remove the brush assembly.
Replace complete brush assembly.
1helpful
2answers

Bosch WFMC2100UC Washer stops in mid-cycle

Hi, it seems its about time to replace the motor carbon brushes.
Thanks
3helpful
1answer

Whirlpool AWO3761 stuck mid-cycle

The cycle doesn't advanceWhen the cycle doesn't advance, it's probably the timer or a cold-water supply problem:

  • It's the timer, if your washing machine fills with water and begins agitating, but the timer never advances--or if the washer is in a spin cycle and the timer won't advance. Then you need to replace the timer.


  • It may be a cold-water supply problem, if the washing machine fills with water, agitates, drains, and spins, but then doesn't fill with rinse water. See There's no cold water.

  • Not finding what you are looking for?

    690 views

    Ask a Question

    Usually answered in minutes!

    Top Washing Machines Experts

    Brad Brown

    Level 3 Expert

    19187 Answers

    Cindy Wells

    Level 3 Expert

    6688 Answers

    john h

    Level 3 Expert

    29494 Answers

    Are you a Washing Machine Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...