This unit does not have a belt,,this model number is for a direct drive washer,,,you have a coupling thats in between motor and transmisson..it looks like the picture enclosed..if we are talking about some other part ,,repost...
Hello,
This tip i wrote will show ya how to take apart that washer
http://www.fixya.com/support/r10355046-apart_whirlpool_made_washer
That washer does not have a belt persay but a coupler between the motor and transmission thats probably broken making it not spin.
It too could be the lid switch but if it drained the water and just wont spin its the coupler most likely... if it did not drain or spin i would suspect the lid switch
87 views
Usually answered in minutes!
×