Need replacement deflector, elbow, bag, craftsman model 113-796811. will any other models parts fit this machine

Finding a specific bag for a 1990 Craftsman Eager 1 chipper vacuum might be challenging due to the age of the machine. However, there are a few options you can explore:

1. Contact the manufacturer: Reach out to Craftsman directly or visit their website to inquire about replacement parts for older models. Provide them with the model number and any other relevant information to see if they have a compatible bag available.
2. Check online marketplaces: Search on websites like eBay, Amazon, or other online marketplaces for vintage or used replacement bags. Sometimes, sellers might have discontinued or hard-to-find parts available for older equipment.
3. Visit local repair shops: Local repair shops that specialize in outdoor power equipment or small engines might have access to vintage or discontinued parts. Visit or call these shops to see if they have a bag that fits your Craftsman Eager 1 chipper vacuum.
4. Explore generic alternatives: If you are unable to find an exact replacement bag, you can consider generic alternatives. Measure the dimensions of the existing bag or the bag attachment on the machine and search for a similarly sized bag that could fit. Outdoor equipment stores or online retailers that sell replacement bags for chippers or leaf vacuums might have options that could work.

Remember to double-check the compatibility of any replacement bag you find to ensure it will fit your specific model.

Very simple. The 6 inch or so pin that holds it on is retained by a clip on one end. To remove clip use a pair of pliers. If you work steadily and carefully you will be able to reuse this clip. After removing clip, pull the pin out. Old deflector and spring be removed now. To get the spring right you have to try it in position before installing it. Just remember that the spring is holding the deflector down so when you are done installing, when you pick up on the deflector there is pressure holding it down. Don't put the pin clip on until you verify the spring force is correct because getting that spring clip off is the Hardesty pay off the job.

You will need to call sears parts line to have them check. Optionally, you can visit the sears website, support, manuals, and enter your tractors model number and download the tractor manual which should list the accessories that fit your machine. However, if the blower is newer than the tractor, it may not be listed. Your best bet is to call the parts line.


Kevin

As long as the model number is correct. Sears still carries the bag for this.

Part No. 410693 for $40 us

I found this at Sears parts direct, and yes there is a website.

U need a diagram ver hard to explain but try this line up your spring in the grooves of deflector put ththem agaibst the deck in between whereyou will nect slide the long pin that goes through the spring and the deflector you can find a diagram on sear parst online web site type in your serial number and model or look in your manual it takes about 2 minsto installjust position correctly and slide in pin ask for second pair of hands

Joe

Hi and welcome to FicYa, I am Kelly.

You will need to make sure that you have items 21 - 29 of this diagram: Scroll way down 75% until you see the deck and belt, then look at item 27 the deflector shield.
http://www.hammerwall.com/Manuals/Craftsman/Description/917.288031/Craftsman%20Lawn%20Tractor%2017.5%20HP%2042%20Inch%20Mower%206%20Speed/L0807249/

It is a matter of sliding the bolt throught bracket on the mower deck and making sure that the shield safety switch is actuated. (Flip up)

I also read the owner's manual (no help!). The only thing about the shield is on page 14 stating to make sure it is in place.

If your missing the hardware to install the deflector shield you can go to http:www.searspartsdirect.com and enter your model number in the search bar. You have to choose model search then click (go).
You will get this diagram if you choose mower deck:
http://www.searspartsdirect.com/partsdirect/part-model/Craftsman-Parts/Riding-mower-tractor-Parts/Model-917288030/0247/1509200/P0905008/00007?blt=06&prst=&shdMod=

Thanks for choosing FixYa,
Kelly

all the manual says is to insert the elbow onto the tube coming from motor and then install bag onto the elbow and for maximum performance empty the bag before it gets half full. On most table saws that I work on there is no fan or anything like that to force the dust away from unit, the best way is to run a shop vac and connect to the elbow for mazimum dust removal.

This part is discontinued.

Your best bet is eBay or swap meet.

It can no longer be ordered from the manufacturer.

CLICK HERE for a current eBay auction for a replacement bag.

Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

Go to sears parts direct.donnyb60