The motor windings have failed. It needs the motor replaced, so it will need to go to a repair center near you. You can find all the information you need from their website.
SOURCE: I need a coupling for
The piece that you need is referred to as the coupler. The coupler is a breakway part that is designed to shear and/or wear down in the event that the blender is overloaded. This is to avoid damage to the motor.
The coupler may be purchased individually and is an easy repair that can be done at home. You may purchase the part and access step-by-step replacement instructions at the following link:
http://www.mendingshed.com/kacoupling.html
SOURCE: Will kitchen aid purchased in USA work in australia?
The Australian outlets will zap that blender - you need to purchase a 240V to 120V transformer in order to make it work.
SOURCE: the rubber gear that turns the blade in the
The piece that you need is referred to as the coupler. The coupler is a breakway part that is designed to shear and/or wear down in the event that the blender is overloaded. This is to avoid damage to the motor.
The coupler may be purchased individually and is an easy repair that can be done at home. You may purchase the part and access step-by-step replacement instructions at the following link:
http://www.mendingshed.com/kacoupling.html
SOURCE: the coupling of my kitchen
Visit MENDINGSHED.COM.
On the left, click KITCHENAID. On the next page, click KITCHENAID BLENDER PARTS. On the next page, you will see a listing for a drive coupling. You want to choose on the left, which is retailing for $5.95.
You may order the part if you need it. If not, click onto the parts order page and scroll down. There will be a two-step instructional guide on how to properly replace the coupler.
SOURCE: the blades stopped turning in the middle of
Does the motor still work if you take the pitcher off of the base? If so, the rod that's in the blade assembly is probably corroded. The blades are connected to a metal rod that passes through a brass tube through to the piece that makes contact with the motor when you put the pitcher on the base. The grease wears down eventually and if you don't pulse and run the motor for a long time at once, the heat can corrode the bar and cause the blade to stop spinning. You can either disassemble the blade unit, or buy a new blade unit online. google blender parts and you can get one for $10
Older KitchenAid blenders had a jar that was
made so the blade assembly could be removed for cleaning. On the newer models
the blender jar and the blade assembly are all one unit so you have to purchase
a new jar to get the blade assembly. All of this is dependent on which
model of blender you have.
We would be happy to help you. Please a give us
a call at 1-800-339-9297 we would be happy to help! One of our repair
technicians can talk you through the repair over the phone free of charge. On
the bottom of your blender is the model and serial numbers; have these handy
when you call so we can help you order the correct part.
We have several blender jars on our Web site http://www.mendingshed.com/kitaidblen.html for KitchenAid blenders. If we don't have the blender
jar that fits your model in-stock we can order it and ship it to you. Please
contact us with any further questions. You can also email your model number or
questions to [email protected]
Sincerely,
Mendingshed.com Staff
339 views
Usually answered in minutes!
×