My office Ricoh Cl2000n is mass printing pages when we only tell it to print one page. It has done this from multiple computers, so this leads me to think that it IS the printer and not the computer, any ideas? thanks

try different network cabel

publib.boulder.ibm.com/infocenter/iseries/v6r1m0/topic/clpdf/SS1-6.pdf

Couple possibilities:
Fuser hot belt has wear lines transfering to the page
Black pcu needs to be replaced
Transfer unit is not being cleaned properly and needs to be replaced.
Remove each of these assy and inspect them for wear or lines that corespond to the lines on your prints.

Print a configuration page and it will give you the total page count.

Call printer support USA Number 1-888-687-4491 Toll-free and find instant help by experts technicins.

You must have a "special paper" size set in the tray other than "plain", or perhaps the wrong size, so the printer needs you to override the setting. Check the settings. You can find out how on pages 24, 25 of the "operating guide". Go to the following web page to download it -just select your model from the drop down list:

http://www.ricoh-usa.com/downloads/manuals.asp?tsn=Ricoh-USA

Printing B&W? Colour? or both?
Depending on your answer, replace the applicable Photoconductor.

these settings need to be done with the RPCS printer driver, go to properties and then custom settings from there you can tell the printer where to print from.
http://www.websitetoolbox.com/mb/copierquestions

If the colors are good and solid with no fades, only black streaks, then black is the culprit. I suggest replacing the black cartridge.

Running cardstock lightly misted with water or dilute cleaning solution through several times can help. Use either the feed button or print using a program that allows you to print blank pages.