In reference to Kenmore washers in general:
Most washer's can be reset like a personal computer.
If the appliance does not accept inputs from the control panel, follow the Hard Reset steps below to reset the control:
- Unplug or turn the circuit breaker off for 30 seconds.
- Plug the power cord into the wall outlet or turn the breaker back on and wait 30 seconds.
- Press the Pause / Cancel / Stop button twice to clear the display.
- Start a short cycle, to check operation of the appliance, by selecting a cycle and pressing and holding the start button until the appliance starts.
Note: If the Hard Reset does not work, there may be an internal failure with the appliance, that requires service
×