20 Most Recent
LeapFrog Leapster 2 Learning System - Page 5 Questions & Answers
Replaced batteries but still will
Hi
Have you had they working at all? you need to hold down the power button for about 6 seconds. Have you done this?? also what type of batteries are they ? rechargeables or regular?
Regards
Dan
1/1/2011 8:42:46 PM •
LeapFrog...
•
Answered
on Jan 01, 2011
Touch screen does not work,
Switch off the console and switch it back on again holding the ? button down. This takes you into a menu, choose the touch calibration, it will take you into a black screen with a cross in one of the corners, touch this with your pen and then touch all the others as they appear, all corners and the center. Once this has been done it will take you back to the menu screen again. Switch the console off and on again and it should work. :)
12/14/2010 3:54:00 PM •
LeapFrog...
•
Answered
on Dec 14, 2010
Touch screen will not respond. It's stuck on
Other sites suggest you power it off. Then hold down the '?' button when you power it back on. Then it says you can select the 'A' button. This is supposed to reformat the stylus.
9/18/2010 1:31:37 PM •
LeapFrog...
•
Answered
on Sep 18, 2010
When i turned on the leapfrog and asked me to log
the screen needs to be re-calibrated. Do this: while powering on the Leapster, hold down the ? key. If it's been worn off, it's the round key on the left hand side above the t-arrow keys and it's the middle button. A new screen will come up that lists Base Info Cart 1 Info, Cart 2 Info, Cart 3 Info. In the right hand corner is a "A" that you can touch with pen beside it, it says "Touch Calib" Touch on that.It will say starting...then in the upper left hand corner there is a +. touch it with pen. it will move to bottom left hand corner. Touch it with pen. It will move to right bottom corner. touch with pen. It will move to upper right hand corner. Touch with pen. It will move to the center of the screen. Touch with pen. Repeat until you come back to the Base Info screen. You're DONE! Power off and on again and you should be all set! Good luck!!
8/11/2010 9:34:39 PM •
LeapFrog...
•
Answered
on Aug 11, 2010
Not finding what you are looking for?