Polaris 800 Twin Sportsman Ride on Toy - Page 5 - Answered Questions & Fixed issues
My Perego Polaris 800 twin
Have you not overload the car?
Circuit breaker will automatically disconnect the power when operating in an overload condition. However, circuit breaker usually reset itself after 10 or more seconds.
In your case this will be your first target, check the circuit breaker
Then check if the battery connector is properly fix.
The last to check is the thermo protector.
I'll be attaching the pdf manual for this model. This include the parts description and the circuit diagram so it will be easy for your trouble shooting.
http://www.pdfstock.com/viewer.php?file=http://peg-peregoparts.com/manuals/IGOD0510.pdf
I bought a new Polaris
Hi alvinr123,
Please check and make sure that the
wiring on the
foot pedal is on. Sometimes the
Peg Perego Polaris models will get corrosion on the
red wire. After checking the wire, go ahead and
charge the
batteries for 24 hrs. If that doesn't work then you need to replace the batteries. I recommend to contact repair department at
http://www.shopjandl.com/kids---baby-ride-on-toys-peg-perego.html.
Additional contact information:
Phone: 1.801.655.0800
Email: [email protected]Hope it helps.
Thank you for using FixYa.
My son put the handle bars on before it was ready
Just did this myself helping a friend. You need two flat head screwdrivers. Put one on each side of the handlebar cylinder that goes into the red body work. The push pins are visible if you just get the body work pushed down a bit from. Don't put the screwdrivers in the black area where the handlebars slide into the base, just get the screwdrivers between the body work and the black base that the handlebars slide into! Hopefully that helps!
Hello, my peg perego polaris
Hi, what you are currently experiencing has to do with a faulty motor which works intermittently maybe due to overheating as you have said or some other electrical reasons.
All you need do is to replace the motor which can get bought from this
LINK
Peg pregeo 800 worked for 30 mins. then just stopped.
Although the problem is not the exact same, it is similar. I finally got mine fixed (see post about does not work when pedal is pushed) My problem was the shifter was bad, or the plug for the shifter was bad. I had to take to Rural King to get it fixed, PP service locations are too far away from me .. hope this helps some.
Does not run when I push the pedal, it is brand
OMG! The exact same situation here! Bought through Amazon, no warranty. I am so bummed. It was rode 5 times by a five year old on flat ground. Now it is a brand new, non operational, made in China piece of $500- junk! I am furious!!!When you press on pedal, nothing happens, fully charged battery, etc. Volt meter even confirmed fully charged battery. What ever happened in your situation? I am so hesitant to buy other parts, or send it here, to put more money into an overpriced piece of ****. Way to ruin Christmas!
The 4-wheel drive will not engage on my 2005 sportsman
jack up again and with it running in park or neutral move switch in and out of 4 wheel and listen 4 the actuator to move if it sounds like its binding or humming or does nothing if binding un bolt from front end possible and check if actuator rod is bent or needs lube alot of times the actuator needs to be cleaned and lubed if their is nothing no sound or movement test actuator if shorted damaged repair or replace as necessary
Polaris Sportsman 800 Twin EFI how to change speed sensor
Mymi Wonder Patch is a new kind of weight loss patch in getting rid of belly fat quickly and effectively,which was made in Korea.It was considered to be a revolutionary invention in weight loss realm.has become the best-seller weight loss treatment slim patch in a few of months.the slim weight patch is for external use only that is totally risk-free and no harmful to body at all.Mymi Wonder patch is the best abdomen treatment patch.
This weight loss products are effective and safe to apply, don't miss if you want to get rid of your belly fat.
12/29/2018 8:35:05 AM •
Polaris Toys
•
Answered
on Dec 29, 2018
•
219 views
Hi I've got a babyweaver
Sounds like you are missing the central support rod or bar that connects the Babyweaver swinging crib to the stand, providing stability and support for the crib. This component is crucial for maintaining the structural integrity of the crib and ensuring safe usage. Here are some steps you can take to address the missing part:
1. Contact the Manufacturer:
- Reach out to Babyweaver or the manufacturer of the swinging crib to inquire about obtaining a replacement central support rod.
- Provide them with details about the missing part and the specific model of the swinging crib to ensure you receive the correct component.
2. Check for Spare Parts:
- Check if the swinging crib came with a user manual or assembly instructions that may have information about spare parts or replacement components.
- Look for any contact information provided for customer support or spare parts inquiries.
3. Online Search:
- Conduct an online search using keywords such as "Babyweaver swinging crib central support rod" or "Babyweaver crib replacement parts" to see if you can find the specific part for purchase.
- Explore baby product retailers, online marketplaces, and specialty stores that offer replacement parts for nursery furniture.
4. Local Retailers:
- Visit local baby product stores or furniture stores that carry nursery items.
- Bring the existing part (if you have one side of the support rod) to help them identify and match the missing component.
5. Custom Fabrication:
- If you are unable to find a suitable replacement part, consider contacting a metal fabrication shop or a carpenter who may be able to custom-make a central support rod that fits your Babyweaver swinging crib.
- Provide them with measurements and details about the required specifications for the part.
3/22/2024 3:29:32 AM •
Toys
•
Answered
on Mar 22, 2024
•
61 views
I have a new model teddy ruxpin and my 2 year old daughter tripped and dropped him. His lights all come on but his app and sound are not working
It sounds like the drop may have caused some internal damage to the electronics or wiring of the Teddy Ruxpin toy. Here are some steps you can take to try and troubleshoot the issue:
- Restart the Toy: Sometimes a simple restart can resolve minor issues. Try turning off the toy completely, including any power switches or buttons, and then turning it back on again after a few moments.
- Check Battery Compartment: Ensure that the batteries are properly inserted and making good contact with the terminals inside the battery compartment. If the drop caused any displacement of the batteries, it might affect the toy's functionality.
- Inspect for Physical Damage: Carefully examine the exterior of the toy for any signs of physical damage, such as cracks, dents, or loose parts. If there's visible damage, it may indicate internal damage as well.
- Test with Different Devices: If the Teddy Ruxpin toy connects to a separate app or device for sound playback, try connecting it to a different device to see if the issue persists. This can help determine if the problem lies with the toy or the connected device.
- Contact Customer Support: If none of the above steps resolve the issue, it's possible that the drop caused internal damage to the toy's electronics or wiring. In this case, you may need to contact the manufacturer's customer support for assistance. They may be able to provide further troubleshooting steps or offer a repair or replacement option.
Keep in mind that since the toy is relatively new, it may still be under warranty, which could cover repairs or replacements for damage caused by accidents like drops. Be sure to check the warranty information or contact the manufacturer for guidance on warranty coverage.
3/21/2024 2:25:15 PM •
Toys
•
Answered
on Mar 21, 2024
•
93 views
Not finding what you are looking for?
