20 Most Recent
Inverter Pure Sine Wave 1500w Inverter - Page 9 Questions & Answers
How do I get parts
There are several ways to go, try the manufactures website, or if you have the skills, radio shack, allelectronics.com or mouser or digikey
2/2/2015 3:31:13 AM •
Inverter...
•
Answered
on Feb 02, 2015
How to get a control circuit schematic for a xantrex Duracell 3000 Watt power inverter
First off you will most likely never find a schematic for any inverter. I have never seen one an they are closely guarded by the factory. Even dealers dont get them. If you study electronics a little you can service one of these things easily. It is really a switching supply. Once opened a compentent service man can repair one. All you really need is a good multimeter an knowledge.
1/26/2015 11:24:17 AM •
Inverter...
•
Answered
on Jan 26, 2015
Will the black&decker BDV066 inverter power a combi boiler
You have to find the power consumption tag on the boiler and see what the amp and wattage requirements are. Then you have to look at the output capabilities of he inverter (watts and amps). Your load should be no more than 80 percent of the inverter.
1/19/2015 1:03:23 AM •
Inverter...
•
Answered
on Jan 19, 2015
I have an inverter that has failed(It got wet).Is there anyone who can repair it for me.When i try to turn it on all the ind leds flash dimly & nothing happens.
you did not give brand nor model, telepathy do not work as good as it is advertised in hollywood movies...
just google "inverter repair wagga-wagga",
solar/wind installers/sellers will be my first choice, they usually do repairs, but investigate first few prices what is equivalent on the market! repair sometime can be more than new item...
if you are electric/electronic savvy, try to check what burn out and do repair yourself, if not - check if any of your friends will be an electrician or electronic technician, instrument electrician, all of them will have base knowledge how to check the item and how to repair it.
hope this will help you, do not forget to vote...
1/13/2015 2:09:05 PM •
Inverter...
•
Answered
on Jan 13, 2015
F4 error e-ef
If you are talking about at KEB F4 inverter, error E.EF = External fault.
This is a programmed response to a input signal or software condition.
9/3/2014 2:44:11 AM •
Inverter...
•
Answered
on Sep 03, 2014
F4 error ls
LS = Low Speed.
Check your direction and speed signals being applied to the control terminal strip
4/15/2014 8:48:59 PM •
Inverter...
•
Answered
on Apr 15, 2014
I have a cherokee 1000
I think you are probably not going to have enough start up power for a microwave.They draw alot of amps on start up and I think your tv or dvd will pull about 1/3 to start.
I have a 8750 watt max watt generator and my wifes microwave is the only appliance in the house other than dryer that will make it change rpms.
Hope this helps you. Thanks
12/29/2010 4:30:10 PM •
Inverter...
•
Answered
on Dec 29, 2010
Prosine 2.5 fault 195
This internal fault code can mean so many things, but basically it more than likely has some internal parts that the smoke is no longer inside. They can be repaired however, email
[email protected] to discuss further.
Thanks, Bob
1/12/2010 7:02:09 AM •
Inverter...
•
Answered
on Jan 12, 2010
Not finding what you are looking for?