20 Most Recent Back to Basics 600 Smoothie Plus Work Top Blender - Page 2 Questions & Answers

You can order a new seal for your smoothie blender here:
http://www.westbend.com/catalog.cfm?dest=dir&linkid=90&linkon=subcategory

From that link, just choose the exact model of your product and order the seal that fits your smoothie blender.

Ok here is a number for you too call Tell them your problem and they should have no problem sending you the part you need being that it is new!.....866-290-1851. they are available by phone Monday through Thursday 7:30am until 5pm and Friday 8:30am until 4pm C.S.T. You may need the make and model number (should be on unit!) I think they are a division of west bend inc.
Please rate my response!
Thank YOU!

the smoothie pro 600 dosen't spin any more.
It turn on but no spinning on the blades.

see if this site has what you need ..

http://www.focuselectrics.com/catalog.cfm?dest=itempg&itemid=3699&secid=53&linkon=category&linkid=91

Please vote !!

Start here and choose your model .. then scroll down to bottom of model page for link to manual

http://www.focuselectrics.com/catalog.cfm?dest=dir&linkid=91&linkon=category

see if this site has what you need ..

http://www.focuselectrics.com/catalog.cfm?dest=itempg&itemid=3699&secid=53&linkon=category&linkid=91

this site should have what you need ..

http://www.focuselectrics.com/catalog.cfm?dest=itempg&itemid=3699&secid=53&linkon=category&linkid=91

see if this site has what you need..

http://www.focuselectrics.com/catalog.cfm?dest=itempg&itemid=3699&secid=53&linkon=category&linkid=91

this site should have what you need ..

http://www.focuselectrics.com/catalog.cfm?dest=itempg&itemid=3699&secid=53&linkon=category&linkid=91

This site should have what you need for the smoothie pro 600

http://www.focuselectrics.com/catalog.cfm?dest=itempg&itemid=3699&secid=53&linkon=category&linkid=91

You need the blending jar seal. Order that and other parts for the blender here assuming they still support your model based on the manufacturing date code. (The manufacturing date code is generally found on a white sticker and will begin with a CA, DR, XM, or W followed by 4 numbers, or a # (number), letter, # (number), # (number) combination):
http://www.focuselectrics.com/catalog.cfm?dest=itempg&itemid=3699&secid=53&linkon=category&linkid=91

Depending on the material, some blender seals can be maintained with a little bit of vegetable oil.

I hope this helps.

Cindy Wells

gently tap the base with a rubber mallet or even the sole of a sneaker. Work your way around and it will come out.

http://www.focuselectrics.com/supportdata/L5716A_SmoothieChoice-SM600-SITSM600LP_ALL.pdf

Here is the web site for all of the questions in regards to replacement parts:

http://www.focuselectrics.com/catalog.cfm?dest=itempg&itemid=3699&secid=53&linkon=category&linkid=91

When you find out how to contact Back To Basics you let me know. They don't seem to exist except to rip you off when you buy their junk

it sounds to me that its riped the drive dog out of the blades i know the black wheel is striped off, i gees the lad put a house brick into it and span it up if thees blenders are left not in use for a time they can seize up and most people never think to turn the rubber wheel to see if the blades still go around first thats how they get striped out, sorry im not much help here

I am looking for the dispensing valve for my BackToBasic. I'm not sure but I think it is a 700. It is a black dispenser with a chrome base. Please let me know if this part can be replaced. I could settle for a white one but it would look like a "saddle on a donkey" as my husband would put it.

Here is the link to the blender jar:
http://www.focuselectrics.com/catalog.cfm?dest=itempg&itemid=4154&linkon=subsection&linkid=112&secid=53

-Tha Mp3 Doctor