ASUS Eee PC 900 Notebook - Answered Questions & Fixed issues
WiFi not working...Function F2 is not turning WiFi
Sounds like the internal wireless card my have gone bad.They tend to do that from heat exposure.You can try uninstalling the card then rebooting, to maybe see if it will bring your wireless back to functioning.If your f2 key stopped working and it was at the time the wireless was turned off, this may also help.A bad wireless card can also effect other components attached to the motherboard as well.Its either a keyboard malfunction or most likely the card has gone bad.Hope this helps a little.Thanks
Some keys won't work
(1) check Fn key is locked- by holding fn key and hitting scroll lock or num lock
(2) Try to restart the computer in safe mode. It may work
(3) Take the computer to a previous restore point
Thanks
Why don't i have the extend desktop option
Hi,
According to Intel, your GPU does not support an independent display configuration without an ADD2 card. See here:
http://www.intel.com/products/chipsets/gma900/
As far as I have noted, your motherboard unfortunately does not have that particular slot.
There is another option. You can always try a USB display adapter. The performance isn't wonderful, but depending on what you need it for, it may do the trick.
Hope this helps.
N40bers 36c2
Easy go to bios sytem push del keyb or F2 wen prompt are begin and then inside the bios system diseable the keyboard on wen windows begin in advanced options or wen the windows are begin touch the caps look keyb in yor keyboard that's all enjoid it please coment !
Computer not responding at all
If it burnt a new HDD then the problem could lie somewhere on the mobo. If it's still under warranty, i'd suggest RMA. Otherwise, you will have to take it back to the computer repair shop and listen to their suggestions.
I forgot my password
Try this:
1. Enter a computer that can link to Internet. Download a
Windows password recovery tool (I recommend Windows Password Recovery Tool 3.0 ) and install it on that computer. Note that: there is a ISO image file. Burn the file into a CD or a USB flash drive.
2. Eject the created CD/USB and insert it into the locked computer.
3. Reboot the locked computer (it's necessary for you to change your computer's Setup to make it boot from CD drive or USB drive) and then followed the process of instructions. Just a few steps, the old password was removed.
4. Now login Windows and set a new password.
Not finding what you are looking for?