20 Most Recent Fisher Price Power Wheels Kawasaki KFX Ninja Ride-On Toy - Page 7 Questions & Answers

Hello,

Check the wires that connects the battery to the main switch on the unit, there might be loose connection somewhere on the wires that connect the unit to the battery, if the device have fuse, to see if it is not blown.

Perhaps, the problem could be that the cables that connect the unit to the battery may be defected, you can change the cables to see if there will be movement or try another battery on the unit to see if it will move.

Take care.

Hello,

I would go to this link and download the instructions. It might give you some advice as to what is going on with the foot petal and how to get it connected. http://www.fisher-price.com/us/powerwheels/product.aspx?pid=38097 If you are unsuccessful then try calling the customer support number at Contact Consumer Relations toll-free at 888-892-6123.

available Monday through Friday 9 AM to 6 PM Eastern Time, 6 AM to 3 PM Pacific Time

pontiac powerwheel stuck in reverse

hey bro take the screw out on the right side of the gear shift then it should be able to shift into rabbit or high and its pretty quick

turn the switch around

from fisher price

You can visit https://store.mattel.com/ and purchase the cable and any other replacement parts.

ebay they should have these or the main supplier of the name

maybe bad battery or charger not compatible

If it is a 12v power wheels, a lawnmower battery will work. I have done it on model # 73690-9993. Make sure you mark the wires on the connector pos(+) and neg(-), should be White for + and Black for -. Then cut the wires and install ring terminals that will fit the lawnmower batt. I would remove the batt. to charge it. **** will on work with 12 volt Power Wheels.****

I just replaced the wheels on the red Fisher Price Kawasaki Brute Force. First use a screw driver to pop off the grey middle nut cover. Then pull of the locking nut with black cap that is under the grey cover you just removed.

Once that is removed the wheel comes right off. There are 4 phillips screws holding the hubs together. Unscrew those and the hubs separate into to pieces (one on each side of the wheel).
Simply place the hubs into the replacement wheels and screw back together. Slide the new wheel on (make sure the washer is still on the rear side of axel).

My replacement wheels actually came with the black replacement locking nuts taped to them. Hammer the replacement locking back on the alex, pop the grey hub cover back on and you are done.

If you are missing the locking nuts, take one of the originals you removed with you to the hardware store and you should have no problem getting them. - MTRAGE

If your power wheels batteries have sat without a charge for more than a few months then they may not come back to life.
I would contact the guys at this website http://www.shopjandl.com/kids---baby-ride-on-toys-power-wheels.html.
Usually the radio has a seperate battery which is not connected to the main battery.
Hope this helps

Usually the clicking noise is caused by a crossed wire in the foot pedal.
I would contact the guys at this website http://www.shopjandl.com/kids---baby-ride-on-toys-power-wheels.html
They seem to know how to figure these toys out.
Hope this helps

Most likely a defective battery.  Typically these Power Wheels batteries only last a couple of years.  If yours is under a year old, you might want to contact Fisher Price about a replacement under warranty.