Bounty Hunter Digger Metal Detector - Answered Questions & Fixed issues
Random beeping metal detector
Get a good quality metal detectors would make only 50% of your task. Only by adding accessories to the Executive setting could be improved. A good pair of headphones, SIP, carrying pouch and a few of the components should be obtained for any treasure hunter. You'll find audio equipment, as well as that might help you capture even faint sounds.more metal detectors
Bounty Hunter Quick Draw 2 Detector de metales
Thanks When you're ready to step up to the world's finest <A HREF="http://detectorsforgold.com/gold/category/metal-detectors-gold">metal detectors</a>, you're ready for Bounty Hunter. And get set to dig deep. Not into your pocket, but into the ground. That's because genuine<A HREF="http://detectorsforgold.com/gold/bounty-hunter-tracker-iv-metal-detector.html">bounty hunter tracker iv</a> can pick out virtually any metal object from any terrain - yet even with all their features, they are surprisingly affordable.
Precision Gold Metal Detector With Digital Display Set Up
instruction manual for the precision gold metal detector: go to
www.maplin .co.uk. then type in L24BK into the product search. the metal detector will come up.then go to bottom of page where it states "media" if you click here a pdf of the instruction manual will come up for download.
Paul
1/13/2018 6:30:33 AM •
Bounty Hunter...
•
Answered
on Jan 13, 2018
•
5,313 views
I have a Pioneer 505
The battery terminals may be tarnished and not making proper contact.You can clean them with fine sandpaper or toothpaste on a tissue. Its possible that the contacts in the switch may not be making proper contact or if the battery terminals are soldered to the PCB the joints may be bad.
When I turn the unit
The detector works by measuring the difference in impedance between its 2 coils (situated in the wand) that changes when a metallic object approaches it
Normally the led and the buzzing would indicate a detection, but since it happens constantly then it's a defect in the connections between the coils and controller board. You must dismantle the unit and check the wires and the soldering points. If they are ok then the measuring circuit for one of the coils has failed - this is terminal, it cannot be fixed.
How to repair a bounty hunter pinpointer
Not that I am aware of, the Bounty Hunter pinpointer is actually one of the best pinpointers on the market for under $100. If it is not picking up to the depth of at least an 1" than it may not be working properly and you might want to send it in for repair to the manufacturer (First Texas Products) it has a 5 year warranty. Call them first at 915-633-8354
Not finding what you are looking for?