20 Most Recent
Craftsman 24 Hp 48" Deck Yard Tractor - Page 2 Questions & Answers
Cant set valves clearance...
Set both intake/exhaust valves at .004 with piston 1/4 inch past top-dead-center on compression stroke if this machine has a Briggs in it
Too much oil runs into carburator.
boy seen this happen too much with these newer aluminum blocks , head gaskets blow and gets to much pressure in crankcase pushes oil right thru the crankcase vent line into carb , you can try replacing the gasket buts been my experience the heads warp too much so it's a moot effort , I just replace short block now if i see em come thru here like that
No spark to the plugs
New riders have safety switches in various locations that will ground the ignition and prevent spark to the plugs if they are not adjusted and/or working correctly. Locate these first and understand how they work and make certain all are in good order. If they are, you will need to turn your attention to tne solid state ignition system on your engine. On today's engines these ignition modules either work or, do not work and will need to be replaced. In other words, they produce spark if they are good or, don't produce spark if they are defective. There is no sophisticated test.
Not finding what you are looking for?