20 Most Recent Toro Lawn Mower With Toro Power Tools - Page 6 Questions & Answers


Gently turn the needel valves all the way in and the back them out 1 and 1/2 turns each. Then you you make adjust ments depending on how the saw runs. If it runs fine at idel the low jet is fine. If it does not run at high speed adjust the hi jet.

Toro Lawn Mower... | Answered on Feb 21, 2014


Could be stuff inside the float bowl holding the float OPEN and flooding it. That IS a weird symptom. Possible coil failure.Is there spark after it dies? Will it re-start? Was the spark plug wet with fuel?

Toro Lawn Mower... | Answered on Feb 15, 2014


check to see if in line fuel shut off valve is open.If so,sounds like carb is gummed up.

Toro Lawn Mower... | Answered on Jan 22, 2014


Was it smoking before you changed oil? Did it start as soon as you changed the oil or did it start smoking a few days later?

Check the oil level again... Ethanol gas kills these Needle valves in the carburetor allowing gas to run through the carb, into the cylinders and down to the Crankcase.

Toro Lawn Mower... | Answered on Nov 23, 2013


I have the same problem. One time this happened and it restarted after a few hours and worked fine for 5 more cuts over a couple of months time. Now again it quit mid cut of my yard and would not restart. When trying to start it would fire for a few seconds and than shut off again. I wated a week to try it again and now it does nto fire at all. This is about a year old mower with only about 10-15 hours of total use.

Toro Lawn Mower... | Answered on Nov 08, 2013


You could also have an overused spring on the carb the connects to the govenor arm. Take the spring off and see how worn out it is.

Toro Lawn Mower... | Answered on Nov 06, 2013


Take off the air filter and inspect lever to see if it got bent and or something blocking movement inside or outside the carb.

Toro Lawn Mower... | Answered on Oct 09, 2013


Clean your carb real good you will be amazed!!!!!!!!

Toro Lawn Mower... | Answered on Oct 02, 2013


Hi,

Does the sector gear turn when you turn the wheel?

Does the steering shaft fit tight in the bushing and does the bushing fit tight in the housing?


df62c83.jpg


The middle of the pinion should be in line with the sector gear. Is this how it is? Did you have the the steering wheel off and check the splines in the wheel? Is the pinion gear turning?

Let me know,so that we could proceed further.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Toro Lawn Mower... | Answered on Sep 09, 2013


which product you want to buy ? you can go to immokm website to see detail of them ?

Toro Lawn Mower... | Answered on Aug 08, 2013

Not finding what you are looking for?
Toro Lawn Mower With Toro Power Tools Logo

1,442 questions posted

Ask a Question

Usually answered in minutes!

Top Toro Garden Experts

Joseph Mueller
Joseph Mueller

Level 2 Expert

346 Answers

roeb

Level 3 Expert

819 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Are you a Toro Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Toro Garden

  • Toro Garden

Most Popular Question

toro 6 5 gts start after taking blade

  • Garden
Loading...