Top 20
Electric Chainsaw Sharpener Questions & Answers
Tighten chain on WEN 5041 electric chain shaw?
First loosten that 1/2 bolt on the bar--the lookat the bar when it goes into the housing you will see the adjustment screw.Tighten the chain by turning the screw when you get it to where you want it then tighten the 1/2 inch bolt
11/5/2011 3:05:32 PM •
Electric...
•
1,294 views • 1 helpful votes
Do you have in stock
Howdy, we are not a parts provider, but rather a problem solving and question answering service. I have located the customer service number for Wen tools so you can get your part as soon as possible.
Here you go:1-800-232-1195
Thanks for using FixYa.com
Regards, Farmerbear
9/7/2010 3:48:27 PM •
Electric...
•
481 views • 1 helpful votes
Can you use Stihl lubicant
If Stihl lubricant is bar and chain oil yes. Any bar and chain oil will work.
If you have more questions or need additional help please reply below and I will get back to you. HTH & Good Luck.
Lou
Thank You for using FixYa.
8/7/2010 4:45:11 PM •
Electric...
•
116 views • 0 helpful votes
Need new chain for wen saw 5014
It is here N;
Oregon Bar & Chain Selector
http://www.oregonchain.com/pro/lookups/selguide.aspx?BusId=OCS&SellReg=USA&LangId=ENG
Select "Wen; 5014; #DriveLinks; All; All; All".
#DriveLinks, the part of the chain that fits in the bar groove. Match the number with the fourth column to get bar length.
The above results are for an original or equivalent bar. Only YOU can determine your level of expertise, how much risk (read the triangular warnings - the OE chain was probably green) you are willing to assume and choose one of part numbers listed. Once you make your choice it can be found on the Internet or through local merchants (no shipping and handling fees). If the local outlet does not handle Oregon your choice can easily be converted to a part number of the manufacturer they do handle. I suggest a few phone calls to save you time and gasoline. Given the Oregon part number and your assurance of a purchase, if my store, your chain would be waiting when you walked in the door.
If you have more questions or need additional help please reply below and I will get back to you. Thank you for using FixYa and Good Luck. HTH
Lou
4/2/2010 10:11:55 PM •
Electric...
•
2,176 views • 2 helpful votes
Chain saw oil
Use regular bar/chain oil available from home centers, hardware stores, and saw dealers. Good luck!
6/6/2010 7:30:28 PM •
Electric...
•
231 views • 0 helpful votes
What lubricant oil is used on the blade of a Wen
I have a Wen 2000 10" electric chainsaw and just ordered a new chain, , but does it need oil poured inside? I have no manual. what kind and how much? can it be over filled, there is a black screw off knob that appears to be for oil?????thanks Kim
4/2/2010 1:53:36 PM •
Electric...
•
1,296 views • 7 helpful votes
When I sharpen my chain with the timber tuff
I will wager if you place a protractor on the bar you will find the right and left links are at slightly different angles (one side gets more bite). It only takes a little difference. The usual suspect is the guide on your sharpener. Some grinders require an offset because the wheel is offset more to one side than the other.
I hope you found this helpful.
Lou
1/18/2010 2:16:25 AM •
Electric...
•
1,080 views • 1 helpful votes
Need parts for WEN model 6014 chain saw
there are none realy take the two nuts lose take a flate head tighten the chain now if you can pull the chain easy around the bar you good this will give you about a 1/8 in sage on the chain...Good luck
8/16/2009 1:22:44 AM •
Electric...
•
1,400 views • 6 helpful votes
Not finding what you are looking for?