20 Most Recent Electric Chainsaw Sharpener - Page 4 Questions & Answers

Likely it's only running on one cylinder.

motor failing

Google it. Plenty of video and manuals.

electrics do not have enough power to be brush cutters

cord driven --- problem start / run capacitor battery --bad contacts , motor bushes wearing out

you will need to ask your local dealer .

check fuse then if good check to see if motor is stuck small screw driver thru the open end of motor it has slots in it I have one that sticks every time i use it

measure the diameter and buy one thats the same

for???

Google make model replacement parts and make model parts schematic to see how it all fits together

ANYI HAVE SEEN ARE 10 NCH ONLY

FIXYA IS NOT A WEEDEATLER RETAILER AND SELL NOTHING

The motor can only spin in one direction! It looks like the blade is fitted the wrong way round! Take it off and put it back properly!

https://www.youtube.com/watch?v=uaADxm3UCcQ https://www.youtube.com/watch?v=uaADxm3UCcQ

https://www.youtube.com/watch?v=xu0zLVsxFGY https://www.kijiji.ca/b-ontario/yardworks-electric/k0l9004

I would say yes. Set the tilt first, then the angle. Check out some YouTube videos showing how to sharpen chains. Good luck

motor is seized or rusted

there should be a bolt on the bottom of the clutch pulley that holds it on. be sure to unplug it first as they are fairly heavy. if it wont just slide off sometimes you may need to pry it off . there are a lot of videos on you tube that show this job.

Go to harbor freight’s website. I’ve bought parts for there stuff before. Or just buy a new one

https://images.homedepot-static.com/catalog/pdfimages/ea/ea22e764-0cc7-4919-9ee4-372aebe0cb30.pdf