KitchenAid Kitchen Aid Kitchenaid 5-speed Ultra Power Blender Blenders 5-Speed Blender - Answered Questions & Fixed issues


I have added two links below for the glass and plastic jar:

9704200P Plastic jar jug for KitchenAid KSB5 and KSB52 blenders (replaces glass KSBGGC 9704200)
9704200 KitchenAid Glass Jar KSBGGC

KitchenAid... | Answered on Feb 06, 2020 | 197 views


I am sorry to hear you are having trouble with your blender.

I have added a link below for if you wish to purchase a glass jar from us:

9704200 KitchenAid Glass Jar KSBGGC

I hope this helps :-)

KitchenAid... | Answered on Jan 23, 2020 | 61 views


Sorry to hear you are experiencing an issue with your blender. We believe that the described issue indicates control board fault.

If you have KSB555, please follow the link below to show you how to replace this part on your appliance.

Hope you found this useful :-)

KitchenAid... | Answered on Sep 12, 2019 | 409 views

how to tighten nut on kitchen aid blender

KitchenAid... | Answered on Sep 12, 2019 | 1,835 views

More often than not it will need the motor to be replaced, only Kitchen Aid parts will do, motors are usually unique to brands and models. Sometimes it can be the control/button panel but normally the motor.

KitchenAid... | Answered on Mar 10, 2017 | 677 views

From Kitchen Aid they only come on a new motor. I am a Kitchen Aid service agent and I remove them from burnt out motors and keep them. Look for a service agent near you and see if they can help you out. I have no idea where you are, I'm in New Zealand.

KitchenAid... | Answered on May 09, 2016 | 246 views

Buy a new one

KitchenAid... | Answered on Sep 23, 2017 | 535 views

Blenders are not to be used for washing dishes, that may be where your problems are.

KitchenAid... | Answered on Aug 04, 2015 | 183 views

If this is a Kitchen Aid blender with the flashing lights then you will need to remove the motor base cover and check the motor for a circuit. If it is open circuit then either replace the motor or locate the thermal fuse (under some white tape and aluminium clip on one of the field windings) and either replace or bypass fuse if it is open circuit.

KitchenAid... | Answered on Dec 06, 2014 | 444 views

Check the motor for continuity, it may be open circuit. If it is locate the thermal fuse covered with insulation tape on one of the field windings (where the metal clip is) Check that for continuity, if faulty bypass or replace it.

KitchenAid... | Answered on Oct 04, 2014 | 129 views

There is no microwave hood on a Kitchen Aid blender

KitchenAid... | Answered on Sep 07, 2014 | 80 views

Try asking this in the dishwasher department, asking it in the blender dept will invite unhelpful replies like this 'cos I know nuthin' about dishwashers.

KitchenAid... | Answered on Jul 26, 2014 | 79 views

You could try asking this in the Tefal part of this forum instead of the Kitchen Aid area as folks who know Tefal may not be browsing this area. You could also be a little more specific about exactly what the fault is that needs repairing.

KitchenAid... | Answered on Jul 26, 2014 | 116 views

Kitchen Aid blenders are used for chopping/blending not heating.

KitchenAid... | Answered on Jul 23, 2014 | 70 views

Magnet is not available as a separate part, you need to buy a new motor and be more careful in the future.

KitchenAid... | Answered on Apr 29, 2016 | 155 views

Lever it off with a screwdriver, it is aluminium and the threads on the ring will break away. Pick them out of the thread on the motor shaft and screw on a new coupling, it will be left hand thread.

KitchenAid... | Answered on Jul 19, 2014 | 182 views

It is more likely the motor is faulty than the circuit board. Test the motor with a meter.

KitchenAid... | Answered on Dec 26, 2013 | 452 views

This will probably need either a new thermal fuse on the field windings or a new motor.

KitchenAid... | Answered on Dec 20, 2013 | 375 views

Assemble it with motor secure and base & feet on. Drill 3 or 4mm hole in edge of coupling Put screwdriver into hole on a large angle and whack the handle to undo the coupling. You are whacking it to turn in the same direction it turns when the motor is running.

KitchenAid... | Answered on Dec 05, 2013 | 95 views

Check for loose connections from mains cable to PCB and from PCB to motor. Check motor for circuit continuity, it may need a new motor, it is rarely the PCB.

KitchenAid... | Answered on Oct 18, 2013 | 80 views

Not finding what you are looking for?
KitchenAid Kitchen Aid Kitchenaid 5-speed Ultra Power Blender Blenders 5-Speed Blender Logo

77 questions posted

Ask a Question

Usually answered in minutes!

Top KitchenAid Blenders Experts

Appliance engineer

Level 2 Expert

194 Answers


Level 3 Expert

8597 Answers

Cindy Wells

Level 3 Expert

6073 Answers

Are you a KitchenAid Blender Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides