20 Most Recent Franklin Industries FBC360D Beverage Cooler - Page 4 Questions & Answers

There are many different causes behind machine not cooling. 1. Defrost can be the cause for your refrigerator notcooling problem. To check to see if you have a defrost problem, look in thefreezer to see if there is ice build up on the evaporator cover. (Theevaporator covers are either in the back of the freezer or on the bottom of thefreezer). 2. If the condenser fan (the one under refrigerator) is notworking, the compressor will cut off on the overload. If the evaporator fan isnot running, there will be no airflow to the machine. First walk up to therefrigerator and listen to see if the fans (one in the freezer on one under thebottom) are running. If one is running and the other is not then get to the onethat is not running and see if something is blocking it. If there is nothingblocking it then replace it. 3. Dirty condenser can be the cause for your refrigeratornot cooling problem. If the condenser is dirty, the compressor will cut off onthe overload. If theseparts working correctly, then probably the compressor itself is faulty. You needto replace it. Hope this will help you. Good Luck.

Part number is: 1858900500

I called a distributor and they said they're no longer in business so that's probably why it was a bit harder to track down.

Cheapest one I found online was from Parts Wizard here.

Hope this info gets you back in gear ;)

Hi!

Could this link be of any help...

http://www.rekitchen.com/refrigerators/965.html

I hope it does..

Hi, try Sears parts direct online first. They carry a wide variety of parts for several makes and models of wine coolers.

https://video.search.yahoo.com/search/video?fr=mcafee&p=Ice+dispenser+won%27t+stop+running&type=E210US1494G0#id=2&vid=30691769491d1616470402498715efe1&action=click This may not be your model but could help you.

You probably need to replace the water filter.... https://www.partstown.com/hisense/hrf266n6cse/filters-screens-driers/parts

On an AEG SANTO 3533, the tray sits on top of the compressor. There is a short metal "tunnel" on top of the compressor. The tray has a plastic clip in the middle which goes through the tunnel and latches up on the other side. To remove, reach to the back of the metal in the middle of the tray, press the plastic clip firmly down, and pull/wiggle the tray backwards horizontally to remove. Needed a torch to see clearly on mine. One of these things that's easy once you've done it once.