20 Most Recent
- Page 4 Questions & Answers
Need to know how to reset washing machine computer
I used to work with pc's and when in doubt I rebooted. Cable boxes, routers and even these fancy machines. Turn it off, unplug it from the wall wait about 30 seconds and plug it back in. I'm not sure if this will do the trick but I had a repair guy here for my old Maytag neptune and he wasn't sure either so I unplugged it and it reset itself. He learned something new that day. Hope this helps. If not someone else will come along and reply as well with another method.
on Feb 11, 2016
Washer will not come on, I have checked the power supply and its good. Is there a way to reset electronics besides unplugging?
Are you saying that the lights are no coming on and there is no action at all? If you have no power at all you will no be able to perform diagnostics. You can look and see if the control board is receiving power by checking the L.E.D. light on the board. To access the board you will remove the screws going across the back of the console and then with a putty knife depress the clip on either end of the console from the front and tip it toward you. Please be super careful because there is electricity in this area. We don't want you to be come damaged with servicing your machine. If you need further assistant I am here to help.
on Feb 06, 2016
Not finding what you are looking for?