Ryobi 40-Volt Lithium-Ion Cordless String Trimmer - Answered Questions & Fixed issues
Ryobi 40v trimmer stops working with 1/2 charge left on battery
Battery is weak. Those lights are really useless...more a marketing gimmick. It almost sounds like it developed a memory...this happens when certain types of batteries are not fully discharged before being placed on the charger. Replace the battery and make sure to follow charging directions for that particular type of battery
Installing the fuel line on ryobi 410r tiller
To install the fuel line on a Ryobi 410r tiller, follow these steps:
- Prepare the tools and materials: You will need a replacement fuel line compatible with your Ryobi 410r tiller, needle-nose pliers, and a small container or towel to catch any fuel spills.
- Remove the old fuel line: If there is an existing fuel line, carefully disconnect it from the fuel tank and carburetor. Use needle-nose pliers to loosen any clamps or connectors securing the fuel line in place. Drain any remaining fuel from the old fuel line into a container.
- Cut a new fuel line: Measure and cut a new fuel line to the appropriate length, ensuring it matches the size and diameter of the original fuel line. It's a good idea to bring the old fuel line to a hardware store to ensure you get the correct replacement.
- Attach the fuel line to the fuel tank: Insert one end of the new fuel line into the fuel tank's opening. Push the fuel line in until it reaches the bottom of the tank. Make sure it is securely seated.
- Connect the fuel line to the carburetor: Locate the fuel inlet port on the carburetor. Insert the other end of the fuel line into the port, ensuring it fits snugly. If there are clamps or connectors, secure them to hold the fuel line in place.
- Check for leaks: Double-check that all connections are tight and secure. Look for any signs of fuel leakage around the fuel line connections. If you notice any leaks, recheck the connections and tighten them if necessary.
- Test the fuel line: Add fuel to the tank and start the engine to verify that the fuel line is properly installed. Observe the fuel line for any signs of leaks or irregularities while the engine is running.
6/28/2023 2:55:37 AM •
Ryobi Garden
•
Answered
on Jun 28, 2023
•
42 views
My ryobi weedeater head stopped spinning. I took apart where shaft connects and lower drive is broken off about and inch. Is that repairable ?
If the lower drive of your Ryobi weed eater has broken off about an inch, it may be possible to repair it. However, the extent of the damage and the specific model of your weed eater can affect the repairability. Here are a few steps you can take to assess the situation:
1. Examine the broken piece: Carefully inspect the broken lower drive and determine if it can be reattached or if it requires replacement. Look for any other damaged components as well.
2. Check for replacement parts: Visit the official Ryobi website or contact their customer support to check if they offer replacement parts for your specific model. If the broken lower drive is available as a separate part, you can order it and replace the damaged one.
6/19/2023 9:19:29 AM •
Ryobi Garden
•
Answered
on Jun 19, 2023
•
40 views
Not finding what you are looking for?