20 Most Recent Singer 7258.CL - Stylist 7258 - Page 3 Questions & Answers

please check the distance between the live and earth surface of the flat iron. the clicking sound could be originating from a possible short circuit

Question edited for clarity and all the typos / spelling errors. Descale it again, but use CLR Descaler which is made for the job. I presume you can feel heat? When using the descaler shake the unit every 5 minutes because the steam valve outlet will be at the top. of the heater chamber. https://www.google.com/search?q=Tobi+Platinum+Model+EC1710+descale Use the mix details for Irons and coffee machines

CLR Calcium, Lime and Rust Remover

CLR Brands https://clrbrands.com > Products > CLR-Household Get rid of stubborn lime, calcium, and rust stains effortlessly with our powerful all-in-one cleaner. Visit CLR Brands now for sparkling, spotless surfaces. ..

Heating elements are vulnerable, they have a filament. Heat being generated should freely disperse. Another reason for having the water tank connected, is the possible buildup of scale. Like with coffee makers, the temperature would not reach a high enough level after some time and the iron then requires descaling.

My anti calc stick is stuck in the iron and the pink holder is broken what do i do

Use filtered water in the iron if your tap water is exceptionally hard or includes a lot of minerals. This can lessen the likelihood of corrosion and mineral development.

Question edited for clarity, it is a 'Tefal' not a 'teal pro'. If it breaks, you can buy another, but descale the inside with CLR or a proper descaling solution.

Calc Collector Tefal Pro Total Express Steam Iron Anti ...

Part Seeker https://www.partseeker.co.uk > Shop Calc Collector Tefal Pro Total Express Steam Iron Anti Limescale Cap Remover - 144190 ... Genuine Tefal replacement removable anti calc lime scale collector ... £13.99 · ‎In stock ..

If your Eurosteam Duet is not heating up and there is no steam being produced despite the water pump functioning properly, it suggests there may be an issue with the heating element or the temperature control system. Here are a few troubleshooting steps you can try:

1. Check the power source: Ensure that the iron is plugged into a functioning power outlet and that the power cord is securely connected to the iron. You can try plugging the iron into a different outlet to rule out any issues with the power source.
2. Inspect the heating element: The heating element is responsible for generating the heat required for steam production. Over time, it can become damaged or worn out. If you are comfortable with electronics, you can use a multimeter to test the continuity of the heating element. If the heating element is faulty, it may need to be replaced by a qualified technician.
3. Clean the iron: Sometimes, mineral deposits or limescale buildup can affect the heating performance of the iron. Try cleaning the iron according to the manufacturer's instructions. This usually involves using a descaling solution or vinegar to remove any mineral deposits from the internal components. Follow the instructions carefully to avoid damaging the iron.
4. Check the temperature control system: The temperature control system regulates the heat output of the iron. If it is malfunctioning, it can prevent the iron from reaching the desired temperature. Unfortunately, diagnosing and repairing the temperature control system usually requires professional expertise. Consider contacting the manufacturer's customer support or a professional appliance repair service for assistance.

For more info about Iron keeps blowing trip when turned on: Dial 1 844 441 2440 for free Garmin map update technical support

If you're experiencing an issue where steam is coming out but there's no pressure when you press the button for the steam to jet out, there could be a few possible causes:

1. Water level: Check the water level in the steam generator or steam-producing device. If the water level is too low, it can result in insufficient steam pressure. Make sure there is enough water in the device according to the manufacturer's instructions.
2. Clogged steam vents: Over time, mineral deposits or debris can accumulate in the steam vents, obstructing the flow of steam. This can prevent the steam from building up pressure. Clean the steam vents thoroughly by following the manufacturer's instructions to ensure proper steam flow.
3. Faulty heating element: The heating element is responsible for generating steam. If it is malfunctioning or damaged, it may not produce enough heat to generate adequate pressure. In this case, you may need to have the heating element inspected or replaced by a professional.
4. Malfunctioning steam generator: If you're using a steam generator, it's possible that there is an issue with the device itself. Check for any error codes or warning indicators and consult the manufacturer's troubleshooting guide. If the problem persists, contact the manufacturer or a qualified technician for assistance.
5. Incorrect settings: Ensure that you have selected the appropriate steam settings

Try editing this into standard written English with no weird abbreviations like 'wud' and spelling mistakes like 'tht'. Start the question with 'make model (what it is)' and then we have some clue. The written English on the website is truly dreadful! At 60,000 questions answered, I shall retire!

No one is able to answer this Dawn and Julia, because no one mentions what 'make and model' you have! Julia post your own question as a new question. 'make model (what it is)' as the first three words. And then the question with as much details as you can. In all likelihood you have a split seam or a defective valve. ..

do an online search for a shop in your area

Question edited for clarity. It is a little known issue. Probably needs to go back under warranty. https://www.google.com/search?q=hinari+steam+iron+digital+screen+not+working ..

Based on the issues you have described with your Phillips Perfect Care steam generator, it is possible that there may be multiple problems with the unit. It is difficult to say whether it is worth repairing without knowing the full extent of the damage and the cost of repair. The leaking water and green and blue lights could indicate a problem with the water tank or the steam generator unit itself. The fact that the electricity went off when you tried to clean it with descaler could indicate a problem with the electrical system. The whistling noise and lack of lights when you plug it in could indicate a problem with the power supply. If the cost of repairing the steam generator is significantly less than the cost of a new one and you have been satisfied with its performance in the past, then it may be worth repairing. However, if the cost of repair is close to or more than the cost of a new steam generator, it may be more cost-effective to purchase a new one. Ultimately, the decision to repair or replace your steam generator will depend on the severity of the damage and the cost of repair. It may be helpful to consult with a qualified technician to determine the best course of action.

How bad is this Scratch? Small light scratches will have no effect on what your ironing. Large, deep scratches are only a problem if they are over a steam jet hole. This can blow steam in the wrong direction which isn't safe. For bad scratches it is often better to replace the iron.

To replace the cord on an iron, you will need to:

1. Unplug the iron: Make sure the iron is unplugged and cooled down before attempting to replace the cord.
2. Remove the cord from the iron: Depending on the model of your iron, you may need to remove a cover or panel to access the cord. Look for any screws or clips that hold the cover in place and remove them using a screwdriver. Once the cover is removed, you should be able to see the cord and the connections to the iron.
3. Disconnect the cord: Use a pair of pliers or a wire stripper to carefully remove the wire connectors from the cord. Be sure to hold onto the wire connectors so you do not lose them.
4. Attach the new cord: Follow the steps above in reverse to attach the new cord to the iron. Strip the ends of the wires on the new cord and attach them to the wire connectors. Be sure to connect the wires according to the correct polarity (i.e., positive to positive, negative to negative).
5. Replace the cover: Once the new cord is attached, replace the cover and secure it with the screws or clips you removed earlier.
6. Test the iron: Plug in the iron and test it to make sure it is functioning properly.

If you are not comfortable or experienced in electrical repairs, it is recommended to have a professional perform the cord replacement. Tampering with the electrical components of an appliance can be dangerous and can cause damage to the appliance or injury to the user.