20 Most Recent Apple iPhone (16 GB) Smartphone - Page 5 Questions & Answers

You can enable or activate your phone without Restoring or Loosing data.Please follow this procedure...

* Open iTunes.You can check your iTunes version by clicking "iTunes" in the menu bar and then clicking "About iTunes."

If you don't have itunes yet,download the highlighted keys below.

DOWNLOAD ITUNES

* Make sure you have the Blackra1n jailbreak tool on your desktop. download the link below

BLACKRAIN FOR WINDOWS

BLACKRAIN FOR MAC

* Attach your iPhone to a USB port on your computer by using the iPhone data cable. Open the Blackra1n tool and then click in the middle of the box where it says, "Make it Rain." Now perform a hard reboot on your iPhone.

To perform a hard reboot, simultaneously, press the iPhone on/off button located on the top right of your iPhone and the "Select" button centered on the bottom of the iPhone below the screen. Hold down both buttons for approximately 60 seconds. Your screen will go black. Then you will see the apple logo. Then your screen will go black again. After about 60 seconds, you will see the normal iPhone reboot screen, which shows the iTunes logo and a picture of a USB data cable.


Release both buttons and you will see the Blackra1n reset screen which looks like a picture of a teenage boy surrounded by iPhone images. Your iPhone should now be fully functional and no longer disabled.


Good Luck...

you can contact the service provider.........

There are plenty of companies who do it reltively quickly. Its quite a common problem. Ask or look around. Google might help. Har without knowing what country you want to do it in.

Hello and Welcome to FixYa!
Kindly elaborate a little, Is your phone unlocked recently. Have you had some sort of issue before, for how long are you having this issue. Is your SIM card of 256k (Its written on the SIM card module).
Waiting for your response.. Concerned Nooh : Team FixYa

What I have noticed with a lot of the iPhones is, if you are trying to connect to a wireless network make sure you are connected via wifi, then open safari and it should ask you to log into the router/network if you cannot even connect to the wireless network make sure that the router/modem is not blocking any devices.

Note: This process will wipe all data from your iPhone 4. You may be able to sync most of the data back once you have restored it.
1. With the iPhone 4 disconnected from your computer, power it off. Press and hold the Power button on the top of the device for a few seconds, then slide the red slider. If this method doesn't work, press and hold the Power and Homebuttons for a few seconds until it goes off.
2. With the iPhone 4 off, press and hold the Home button while connecting it to the computer you registered it from. It should then power on.
3. Keep holding the Home button until you see a Connected to iTunes message appear on the screen.
4. Open iTunes and it should provide a message about an iPhone connected in Recovery Mode.
5. In iTunes, select the Summary tab and click Restore and follow the prompts.
When the process is finished, your iPhone 4 should be available again without the need for a password.

Caller ID is a staple in every iPhone. Your service provider may have blocked your Caller ID, so make sure to check with them first. To check if your iPhone has enabled the Caller ID setting:

1. Go to settings.

2. Click on Phone.

3. Click on Show my Caller ID, and select Yes.

Reset your pass on a pc and make it simpler to type in the iphone Good luck Rene Pls add humbs

You need to put your iPhone into recovery mode. To do this:
Press and hold both the "power" and "home" buttons until the phone turns off.
Once the phone is off and the screen goes black, release the power button while continuing to hold down the home button.
Hold the home button for approximately 10-15 seconds and you should see the screen come on with an image directing you to plug your iPhone into your computer.

Your phone is now in recovery mode. iTunes will detect the phone's status and reformat it so that it will once again work properly.

I think the best thing is simply go to your provider and ask him to open your iphone, good luck

If you bought your iPhone from someone instead of an official reseller such as Apple Stores and Apple's partners around the world, this could mean that your iPhone was unlocked through a jailbreak and once you upgrade the firmware you lost your jailbreak and your unlock. This means you'll have to jailbreak and apply an unlock so you can use your SIM card. I suggest you take a look at blog.iphone-dev.org and iclarified.com and look for tutorials on iPhone.

connect it to itunes and restore your phone after backing it up. This process will force you to update your iphone as well.

The passcode is 0000. That's four zeros. Hope this helps!

To fix this, tap on the screen using 3 fingers at the same time. That will zoom you out to normal screen size.

To turn off that feature, go to Settings>General>Accessibility> Turn OFF Zoom or any of the other stuff in there if you don't need it.

For more iPhone / iPad / iPod touch tips like jailbreaking and unlocking, CLICK HERE.

have you tried entering dfu mode and trying to restore it?

Hi

It must be a hardware issue or may be the connectors inside the phone are the culprits.Since you are not tech savvy, I suggest you to go through the bellow article to get a detailed idea, if that help you:- http://ipod.about.com/od/iphonetroubleshooting/a/iph_ring_delete.htm If nothing works it is requested to take your phone to the i phone service center. Please get back to us if you have further query else please accept the suggestion.Thank you for contacting fixya.com

Go to the link provided to get detailed instructions (with pictures) on how to insert a sim card into your new iphone.

Link: http://www.maclife.com/article/how_remove_iphone_sim_card

Hope this helps.

you cont download any thin from i phone to Computer

just sent to email then down load

[but you can sync data through i tunes it may be erase your data be sure if it sync with another pc ]

maybe try going to settings then mms messaging and turn on

maybe go to apple site and try to re-set it. hope this helps